-
My Johnny 5 impersonation, "I need input!"
As the only SpyderRyder in my local VFW rider group, I am also the only one not flying flags when we do rides. I almost bought the ISCI flag mount, but they left before I could get back to them on Saturday. After looking around the site, and other Spyders, I noticed another mount that was interesting, the RIVCO mount. What I'm asking for are comments on either mount if you've got them, had them or just want them. Like to know if there are any issues with either one, stability, loosening up, etc. Thanks for any 'input'.
-
POPEYEART
Originally Posted by LLSailor
As the only SpyderRyder in my local VFW rider group, I am also the only one not flying flags when we do rides. I almost bought the ISCI flag mount, but they left before I could get back to them on Saturday. After looking around the site, and other Spyders, I noticed another mount that was interesting, the RIVCO mount. What I'm asking for are comments on either mount if you've got them, had them or just want them. Like to know if there are any issues with either one, stability, loosening up, etc. Thanks for any 'input'.
ALSO LOOK AT ( WWW.RUMBLINGPRIDE.COM ) FOR FLAGS AND MOUNTS I AM USING THEIR LICENSE PLATE MOUNT AND
DISPLAY 2 FLAGS ON MY RTS WITHOUT ANY PROBLEMS
-
SpyderLovers Sponsor
i have the tall flag mounts from isci and love it you can actually fly 4 flags from it.saw it done at spyderfest. i know 200 is alot but i feel was worth it,expessically if want to display flags from your bike.j.m.o.
jim
Tall flag mount, spyderpops skid plate & stainless steel screen mesh, airhawk adjustable cushion, raised white lettered tires.
-
Originally Posted by POPEYEART
ALSO LOOK AT ( WWW.RUMBLINGPRIDE.COM ) FOR FLAGS AND MOUNTS I AM USING THEIR LICENSE PLATE MOUNT AND
DISPLAY 2 FLAGS ON MY RTS WITHOUT ANY PROBLEMS
I have a set of these. I took them off, but may use them for special events. NOTE: THe ones for the license plate need to be bent OUT a tad since they are tall enough to where the tip blocks access to the back truck (at least on the RT).
-
Hmmm, three responses and two were for products I hadn't even considered.
-
Pat,
I have the Rumbling Pride TCM mounts...(you've seen those), and I saw and got to take a close look at the new Rivco mounts that mount under the trunk lid. If I lose another set of the Rumbling Pride mounts in Westport like the last set, I'm ordering a set of those from Rivco - they're solid as a rock, and the masts are stainless rod.
My opinion, FWIW..
-
I have the rumbling pride mounts and have not had any problems.
-
Very Active Member
My Johnny 5 impersonation, "I need input!"
Rumbling Pride, just my opinion
Cruzr Joe
Sent from my iPad using Tapatalk HD
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Just got my Rivco flag pole mount they look great on the bike and easy to install they are nice look flag poles I have looked for 2 years for something like this and now I have them.
-
I had 2 Rumbling Pride flag mounts on either side of my back trunk. Notice I said HAD!!! They are both somewhere on the interstate. Let them know of the loss and they were monumentally uninterested. After paying close to $100.00 for the 2 mounts you would have thought they would have said sorry about that, kiss my a$$ or something. Never a word back. Just my opinion on Rumbling Pride. Hubby (Tobor 9) cobbled together a flag mount for me using the cup holder from Tric Led and an electrical bonding clamp. Have them attached to the passenger hand grips. Works very well.
-
Originally Posted by KCPete
Pat,
I have the Rumbling Pride TCM mounts...(you've seen those), and I saw and got to take a close look at the new Rivco mounts that mount under the trunk lid. If I lose another set of the Rumbling Pride mounts in Westport like the last set, I'm ordering a set of those from Rivco - they're solid as a rock, and the masts are stainless rod.
My opinion, FWIW..
Don't get me wrong...my Rumbling Pride mounts were pulled off the trunk while we were in a store! I personally like the mounts but would like something bolted on should these get lifted again.
Sent from my Nexus 7 using Tapatalk HD
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|