-
Running boards or hwy pegs
Hi I just brought home my brand new Spyder rt limited. I love it. My question is what type of running boards or hwy pegs does everyone like
-
Active Member
pegs or boards
Originally Posted by Mspiggyz
Hi I just brought home my brand new Spyder rt limited. I love it. My question is what type of running boards or hwy pegs does everyone like
I tried pegs but wasn't 100% happy. I now have ISCI boards on my RT Ltd & they're a great improvement. Not sure that I might not like Seal Floorboards even more as I really like to move my legs when driving.
I wish there was a way to demo some of the alternatives before investing.......
-
Active Member
I'm a Vertika floorboard man myself
Me & My Babycakes
-
Very Active Member
Seal Floor Boards are the way to go.
-
Registered Users
Seal Floorboards, While the Vertikas are nice they are a bit Pricy
Glo Ryders {4 sets (Blue, Red, Orange, Pink) I swap out}
Rear Trunk Liner ......... Seal Floorboards
Rear Trunk Shelf
Corbin Heated Seat
extra 12V plug
Elka shocks
White/Red fender lights
Bump/skid
Baker Wind Wings
Honey Burl Dash Kit
-
Registered Users
The Vertika's are the Rolls Royce of floorboards - priced the same. The Ford version are the Seals, which I have on my RT, and they work really well.
2014 RT SE6 Rider
X - Honda Rider
X - RT S driver
X - RS driver
Lifetime VFW Member
-
Active Member
If you are thinking about the Seals Floor boards check this special offer out.
http://www.spyderlovers.com/forums/s...COUNTDOWN-TIME!
2011 RT LTD /MODS: Seal Floorboards, Elkas, SpyderPops Bump Skid and Block off plate, HMT Brake light, BajaRon's sway bar, Heim Links, Diamond R's passenger armrest, Utopia driver backrest
-
Very Active Member
-
Registered Users
Floorboards are more comfy for me. I've got the Spyderpops boards.
-
We have the Seal Floorboards and love them. Able to move the feet around and they are nice people to work with.
Happy riding,
Harley & Darlene Kamper (the happy Kampers)
-
I still love my ISCIs...ISCI Boards.jpg, but we've got a LOT of really good possibilities available!
-
Very Active Member
Running boards or hwy pegs
Originally Posted by Mspiggyz
Hi I just brought home my brand new Spyder rt limited. I love it. My question is what type of running boards or hwy pegs does everyone like
I have the Seal Pup floorboards and the Lamont NBV pegs, best of both worlds.
Cruzr Joe
Sent by morse code from a hidden bunker
2018 F3 Limited, BRP Driver Backrest, Spyderpops Lighted Bump Skid, Dual Spyclops Light, Mirror Turn Signals, Laser Alignment, Engine LEDs, Fog Lights With Halo's, Cushion Handgrips, BRT LEDs, and Under Lighting, Lamonster IPS, (with Clock), F4 25" Vented Windshield with Wings, Airhawk "R" Cushions. Position 4 Brake setting, Short reach Handlebars, Dash Mounted Voltmeter and 12 Volt Plug. Set of 3rd pegs. Extended Passenger Seat. Exterior BRP Connect setup, Ultimate Trailer
-
Originally Posted by Mspiggyz
Hi I just brought home my brand new Spyder rt limited. I love it. My question is what type of running boards or hwy pegs does everyone like
Try looking at boards from web-boards.net. My wife and I each got ones and we love them.
-
Very Active Member
Originally Posted by Harrold
Try looking at boards from web-boards.net. My wife and I each got ones and we love them.
Very nice looking boards. Thanks for the post.
2008 GS Phantom, 2012 RT Limited
Cheryl Reinhart Ragsdale
-
Very Active Member
Originally Posted by ornerydog7
Just a reminder, my SEALS UNDER THE TREE Free Shipping Special is only good thru Dec. 31st. It's a great way to end the year and........
Ride in comfort,
John
Seal Floorboards
-
Very Active Member
Check out the new feature on sealfloorboards.com. You can now get interest free financing for 6 mo. thru paypal plus free shipping until Dec.31st. What a great way to start the new year
Ride in comfort,
John
Seal Floorboards
-
-
Very Active Member
-
cheap way to go floorboards
I got my set from
http://www.spyderlovers.com/forums/member.php?4890-InspectorGadget alias Randal Geiger out of fla. cost less then $125 and easy to install and works fine ride safe Rich
-
Registered Users
Running boards
I have a question about floor boards. Every picture I see of floor boards they are on a SE5, Do they make them for a SM5?
-
Very Active Member
-
Registered Users
Looks like someone ripped off John's engineering. However, at the same price, I don't think they would hold up to the punishment of a 290# guy…. the Seal's do. Plus, I think the rubber top layer is preferable to bedliner….
2014 RT SE6 Rider
X - Honda Rider
X - RT S driver
X - RS driver
Lifetime VFW Member
-
Very Active Member
Originally Posted by Dragonrider
Looks like someone ripped off John's engineering. However, at the same price, I don't think they would hold up to the punishment of a 290# guy…. the Seal's do. Plus, I think the rubber top layer is preferable to bedliner….
My attorney is reviewing my patent now.
Ride in comfort,
John
Seal Floorboards
-
Registered Users
Good luck John - you've been a good supporter for SpyderLovers….
2014 RT SE6 Rider
X - Honda Rider
X - RT S driver
X - RS driver
Lifetime VFW Member
-
SpyderLovers Sponsor
Originally Posted by spyderpoop
i have these also for the price there very sturdy and good looking also.would recommend these if your trying to keep the price down on mods this was one of the cheaper mods to do.no labor charges for install diy in 10min.
Tall flag mount, spyderpops skid plate & stainless steel screen mesh, airhawk adjustable cushion, raised white lettered tires.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|