-
SpyderLovers Founder
Next little project (Pipe)
I picked up a can off of a Warrior and the size of the can really fits the look of the Spyder. What do you think?
-
Registered Users
Re: Next little project (Pipe)
Originally Posted by Lamonster
I picked up a can off of a Warrior and the size of the can really fits the look of the Spyder. What do you think?
WOW! Great looking can. Keep us posted on the sound/fit, etc. You may have discovered a simple and less expensive way to improve the sound and looks of the ugly (IMHO) stock can!!
Sam
SN 0038 ... Dec, 2007
-
SpyderLovers Founder
Re: Next little project (Pipe)
I picked this one up for $125 bucks and I'm pretty sure I'll have less than $200 in the whole project.
-
Re: Next little project (Pipe)
Looks great.
Wonder how much remapping, if any will be needed?
The diameter of the can would make a gatlin gun exhaust tip look sweet.
-
SpyderLovers Founder
Re: Next little project (Pipe)
Originally Posted by tfjunkie
Looks great.
Wonder how much remapping, if any will be needed?
The diameter of the can would make a gatlin gun exhaust tip look sweet.
From what I've been reading there has been no map changes on the aftermarket pipes. I would say if I opened up the air at the same time I would have to remap.
-
Re: Next little project (Pipe)
I think most of us want a little performance sound and maybe pickup a few hp's along the way.
-
Re: Next little project (Pipe)
I think it would look great with two pipes on it!
-
Re: Next little project (Pipe)
Dual gatlins???
Cool
Put the can on with fresh plugs and give it a little run, (20-50 miles)
After that compare them to the old plugs.
If the tips look the same, good.
White tips.....too lean
Dark tips......too rich
Same applys to when someone wants to change an air filter to let in more air.
-
SpyderLovers Founder
-
Re: Next little project (Pipe)
Originally Posted by Lamonster
It has begun
Click for fullsize
this has to be the #2 best mod so far after that cool spydie seat... nice one lamonster sound yet??
-
SpyderLovers Founder
Re: Next little project (Pipe)
Originally Posted by joet
this has to be the #2 best mod so far after that cool spydie seat... nice one lamonster sound yet??
I'll post a sound file when I'm done. Working on the mounts now. This should be pretty Killer. ;D
-
SpyderLovers Founder
Re: Next little project (Pipe)
-
SpyderLovers Founder
Re: Next little project (Pipe)
And here a little walk around video with sound.
http://media.putfile.com/New-Spyder-...s-of-a-Warrior
Total cost on this project was $145 bucks.
$125 for the can and $20 for the 90*
-
Re: Next little project (Pipe)
Looks good.
Can't wait to hear the sound.
I am thinking we need to meet at the rental m/c parking lot and let folks drooooooool?
-
SpyderLovers Founder
Re: Next little project (Pipe)
Originally Posted by tfjunkie
Looks good.
Can't wait to hear the sound.
I am thinking we need to meet at the rental m/c parking lot and let folks drooooooool?
Play the video and you can hear it. Not a whole lot of change from stock and that's fine with me. I want to keep the noise down on this one.
I am going to make a Spyder web heat sheild kinda tie everything in.
-
Very Active Member
Re: Next little project (Pipe)
Originally Posted by Lamonster
Play the video and you can hear it. Not a whole lot of change from stock and that's fine with me. I want to keep the noise down on this one.
I am going to make a Spyder web heat sheild kinda tie everything in.
Sounds nice. I am curious to see what BRP does about our stock heat spots.
When you say "web heat shield", are you refering to the heat by the legs?
-
SpyderLovers Founder
Re: Next little project (Pipe)
Originally Posted by smokster
Sounds nice. I am curious to see what BRP does about our stock heat spots.
When you say "web heat shield", are you refering to the heat by the legs?
No, just something so my foot won't rest on the hot pipe.
-
SpyderLovers Founder
Re: Next little project (Pipe)
Got to put about 150 miles on today with the new pipe and I really like it. The sound is a little deeper than stock but still very pleasent to the ears. Didn't really need the heat guard like I thought I would, that may be needed when riding two up. I ran out of rod to finish it and I changed my mind on how I want to do it anyway. ;D
-
Re: Next little project (Pipe)
8I can't believe what I am seeing. I had a Yamaha Warror and could not get that oversized can off fast enough and here you are putting one on a Spyder? Are you a past Harley rider with no taste? That should get all of the past or present Harley guy going. I sold a BMW K12ooGT to get a Spyder and still waiting - my deposit went in in March. What a way to run a company - they have more business that they can Handel.
Milehighspyderman
-
SpyderLovers Founder
Re: Next little project (Pipe)
-
Re: Next little project (Pipe)
Well folks i got to meet lamont and his mildly (at the moment) mod'ed spyder.
The can is cool and the hwy pegs are comfy.
-
Very Active Member
Re: Next little project (Pipe)
Originally Posted by tfjunkie
Well folks i got to meet lamont and his mildly (at the moment) mod'ed spyder.
The can is cool and the hwy pegs are comfy.
Does his unit have the 1" handlebar riser with the hyw pegs or are they standard?
-
Re: Next little project (Pipe)
Originally Posted by smokster
Does his unit have the 1" handlebar riser with the hyw pegs or are they standard?
I am going to say no to the risers.
You bring up a point i did not observe, due to my having too good a time with the hwy pegs.
I am about Lamonts height.
Hmmmm..........
-
SpyderLovers Founder
Re: Next little project (Pipe)
Originally Posted by smokster
Does his unit have the 1" handlebar riser with the hyw pegs or are they standard?
My unit? :redfaced: ;D
I have the stock risers on my Spyder and I'm 5'11".
I'm thinking about making this a one piece now and if you need adjustment you could go with something like this.
-
Very Active Member
Re: Next little project (Pipe)
That is exactly the peg I was looking at after talking to you.
Will the bracket be lower than what you have then?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|