-
Luggage racks
Do they make luggage racks for the 2011 rts?
-
Very Active Member
Rack for Spyder RT
Diamond R Accessories a site sponsor was looking at getting a Rack made for the Spyder RT see :-
http://www.spyderlovers.com/forums/s...603#post492603
Not sure what the latest infomation is - You may have to contact them for an update
Hope this helps
Eddie Sheppard
Reading UK
-
Teddys favorite human
May I also suggest sending a PM to InspectorGadget
-
Those two options are pretty much it for right now... Diamond R is in the final stages of getting theirs to market; if you can be patient, you'll have to choose between theirs and Gadget's...
Happy shopping!
-
JMO, not a big fan of hanging my valuable's to "Tupperware". Reciver hitch and a rack would be a better option in my book..
-
-
Very Active Member
I have Inspector Gadget rack, works great. I do not know if he is site sonsor or not. It was not hard to install, but you have to be careful on drilling holes. It took 7 hours to dril the first hole in that 2 million piece of tupperware. Not really.
Diamond R stuff all seems to be great.
I am concerned about weight on the trailer hitch. That a solid to axle mount.
Oldmanzues
-
Active Member
inspector gadget
I also have the I/G rack. Just used for a trip to SITA and it worked perfect. As long as you measure precisely, very easy install. I highly recommend!
-
Very Active Member
Luggage racks
I opted for this set up. Decent quality and only $60. It does require a hitch. I went with the BRP version. Weighed everything, kept it 20% under the 40# maximum and off I went. It worked out incredibly well on my recent 3366 mile round trip to the Black Hills, Sturgis, etc..
http://theusatrailerstore.com/produc...oler-rack.html
I'm mobile using Tapatalk
2022 Plasma Red, F3 Limited, Special Series
-
Quick release
[QUOTE=tofriendscreek;508463]I opted for this set up. Decent quality and only $60. It does require a hitch. I went with the BRP version. Weighed everything, kept it 20% under the 40# maximum and off I went. It worked out incredibly well on my recent 3366 mile round trip to the Black Hills, Sturgis, etc..
http://theusatrailerstore.com/produc...oler-rack.html
Like the look of this rascal. Did you use it on the Wing or Spyder ? If on a spyder do you have any pics ?
-
Very Active Member
Luggage racks
Yep, found one. If anyone wants, I can take a closer shot this weekend.
Its held in place on the hitch by the ball or a bolt. Once tight, the 2 Allen set screws which go through the plate are tightened and keep the plate from moving side to side. When we were 2 up, the rack is close to being horizontal.
The rack is inserted into the mounting plate and held with 2 PTO pins. Really easy on and off. Takes a few seconds to flip the pin lock, pull the pins and slide the rack out.
I'm mobile using Tapatalk
2022 Plasma Red, F3 Limited, Special Series
-
If you could , a couple closeups would be great .I have the hitch already and have a cooler carrier that has a reciever connect on it. Would be nice to adapt it to spyder ball hitch.
John
-
We are picking up our racks tomorrow at the shop, both styles. We will have them at Lamonsters BBQ. The shop has installed one on our bike, I will try to post pics tomorrow.
enjoy the ride
Allen & Patti
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|