Ultimate seat installed

[MindlessMuse]

After debating having the dealership do it, I decided to give it a try. Again, there are some great post on here regarding seat removal. Come to think of it, I should have done pics during.

ImageUploadedByTapatalk1340491540.287953.jpg
ImageUploadedByTapatalk1340491558.477549.jpg
ImageUploadedByTapatalk1340491582.750877.jpg
ImageUploadedByTapatalk1340491598.268333.jpg

I did take it for a little ryde after and compared to the stock, it feels like I am more upright and a smidge closer, but it is definitely comfortable and holds me in there nicely cornering or acceleration.

Kevyn


2012 RS - White
Helibar Risers | SFB Black Anodized Front Floorboard Set |
Can Am Spyder Billet Brake Lever Cover Kit | R-35 Saddlebag Panel Kit
R-35 Rigid Saddlebag Kit | Sport / Touring Windshield

[DynamoBT]

Which one did you get? The "Low Rider" or "Mid rider"?

[spydaman60]

After debating having the dealership do it, I decided to give it a try. Again, there are some great post on here regarding seat removal. Come to think of it, I should have done pics during.

ImageUploadedByTapatalk1340491540.287953.jpg
ImageUploadedByTapatalk1340491558.477549.jpg
ImageUploadedByTapatalk1340491582.750877.jpg
ImageUploadedByTapatalk1340491598.268333.jpg

I did take it for a little ryde after and compared to the stock, it feels like I am more upright and a smidge closer, but it is definitely comfortable and holds me in there nicely cornering or acceleration.

Kevyn

2012 RS - White
Helibar Risers | SFB Black Anodized Front Floorboard Set |
Can Am Spyder Billet Brake Lever Cover Kit | R-35 Saddlebag Panel Kit
R-35 Rigid Saddlebag Kit | Sport / Touring Windshield

mine is supposed to be coming on monday afternoon. how long did it take, and are there any helpful hints for doing it?

[MindlessMuse]

I got the midrider seat. I think it took about 45 minutes or so. I did it in my apartment parking lot with my car next to me holding the other seat while I removed and bolted on pieces.

I followed the following thread for first part of removal:

http://www.spyderlovers.com/forums/s...in-ten-minutes

The only thing I had any problems with was the latch. But after a quick adjustment, it went in properly.




2012 RS - White
Helibar Risers | SFB Black Anodized Front Floorboard Set |
Can Am Spyder Billet Brake Lever Cover Kit | R-35 Saddlebag Panel Kit
R-35 Rigid Saddlebag Kit | Sport / Touring Windshield

[daveinva]

Looks great!

I'm glad you didn't ask your dealer to install the seat, it would have been a needless waste of money. ANYONE can do the seat removal and install within minutes.

The big tips I have are these two:

1. Remember that the seat hinge comes off like a socket, i.e. you do NOT screw off the mounting plate to the seat, just the socket to the piston, pops right off.

2. Having a spare set of hands for a couple minutes to hold the new seat all the way back while you mount to the hinge at the back of the bike helps make this pain-free.

[JaymeG33]

I have the same seat and love it! Very nice choice! Did you get white stitching or silver?

[DocRags]

We got the Ultimate seat last October in Panama City...you will LOVE riding on it. Took a little getting used to but soooooo comfy!

[spydaman60]

I have the same seat and love it! Very nice choice! Did you get white stitching or silver?

i got an orange embroidered spyder on it with the standard stitching.