The Answer To Your Quest For The Perfect Cup Holder

[murlaw703]

Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12

It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !

Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2

Try one...I just ordered three Paint it, beat it or write it bad checks, but you have to get one ! Below is a picture of the "Perfect Cupholder":

[thehawk]

Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12

It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !

Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2

Try one...I just ordered three Paint it, beat it or write it bad checks, but you have to get one ! Below is a picture of the "Perfect Cupholder":

Got one ... just love it! I think Yazz originally mentioned it.

thehawk

[murlaw703]

They also make a mobile phone holder that is perfect for those of us who sometimes use the phone for navigation. This will clip right onto the top of the dashboard...

http://www.amazon.com/Brica-64012-Ph...5668124&sr=1-6

[murlaw703]

Kudos to Yaaz ! I missed that in the forums...Thanks !

Got one ... just love it! I think Yazz originally mentioned it.

thehawk

[strictlyred]

I want, but they won't ship to Canada....bummer

[Max LTD]

I checked around yesterday and Toys R Us has them for sale.

I want, but they won't ship to Canada....bummer

[RydeOnThree]

just checked at my local Toys R Us and they do not have them and can not order them. So will have to get it shipped to an address in Port Huron, Mi.

[strictlyred]

I ordered one on toys r us website.
total cost with shipping and taxes was roughly 23.00

just checked at my local Toys R Us and they do not have them and can not order them. So will have to get it shipped to an address in Port Huron, Mi.

[strictlyred]

http://www.toysrus.ca/product/index....uctId=12426544

[RydeOn3Wyfe]

I ordered one on toys r us website.
total cost with shipping and taxes was roughly 23.00

Thanks for the information. I just ordered our 2 Brica's and it was fun trying to get to the area of their website but i can't be fooled.
Thanks again for the info

[netta]

[QUOTE=murlaw703;446604]Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12

It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !

Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2

where did your friend have his located at? I have been looking for one that I can clip on for the driver.I have a cup holder already that clips on the passenger hand grip.

[BitSlayer]

This will clip right onto the top of the dashboard...

I take it these will hold well to the top of the dash? I am looking for both drink and phone holders. This may be the cheap man's solution...

[Jbiancolli]

I take it these will hold well to the top of the dash? I am looking for both drink and phone holders. This may be the cheap man's solution...

Any photos on the bike?

[Clicker1944]

Thank you, thank you, thank you for the heads up on this product.
These are great. I received 2 cup holders and the phone holder yesterday and could not be more pleased.
Great price, easy as pie on and off. I put my wife's on the left passenger handle and mine on the dash...hold like glue.
Also put the phone holder on the dash with no problem. Phone holder is a tight fit with a Motorola Razr but it still works, the Iphone would be a perfect fit.
Ordered mine through Amazon.
Oh and they look good too.

[Macca]

Bought our at Toys R Us just before Spyderfest and it worked great.
Had it attached to the front dash lid.
I will try and spray paint it, dont like the color.
ImageUploadedByTapatalk1336232730.328352.jpg

[murlaw703]

These are the smart man's solution i.e. no drilling, no RAM mounts, no spilling and move them wherever you want. Your only limitation is your limitations..lol.

[murlaw703]

I don't like the color either ! Do you know what paint would stick to these babies ? (pardon the pun)

Bought our at Toys R Us just before Spyderfest and it worked great.
Had it attached to the front dash lid.
I will try and spray paint it, dont like the color.
ImageUploadedByTapatalk1336232730.328352.jpg

[Clicker1944]

They are cheap enough that if you screw it up painting it you can just buy another one LOL.
I don't mind the color too much but that lime green button.....sheeesh.

[Clicker1944]

These are the smart man's solution i.e. no drilling, no RAM mounts, no spilling and move them wherever you want. Your only limitation is your limitations..lol.

Totally agree, I did not want this to be another project.
What an easy and simple, yet effective solution.

Having trouble finding the plug to keep everything cold.

[Macca]

I don't like the color either ! Do you know what paint would stick to these babies ? (pardon the pun)

I would think Kyrlon Spray Paint Fusion for Plastic should work fine.

[murlaw703]

Well that lime green button got to me also, so I just finished painting the RT the same color so my $12 cup holder doesn't look out of place...lol...not.

They are cheap enough that if you screw it up painting it you can just buy another one LOL.
I don't mind the color too much but that lime green button.....sheeesh.

[JerryKaren]

Today I met and rode with Spyderryder. He has a beautiful black Premium, the first RT sold in Las Vegas in fact. I was struggling with my cup holder and my wife was missing hers, so my friend told me to take a look at his. I was totally amazed and told him he was a "genius". He replied that he was just an Amazon.com shopper. This cup holder is made of tough plastic, gently clamps on with very sturdy clamps that are plastic with soft rubber inside to protect the byke and can be mounted anywhere on both the back and front of the byke. I had to get one. He told me to go to Amazon.Com and look at "Brica" in the Baby Section ! It is a cup holder made for strollers and it costs just $12

It looks outstanding, pops right on and off with no messing around with placement, etc. that a lot of us have struggled with. He is a genius !

Here is the link : http://www.amazon.com/Brica-64009-Dr...5658775&sr=8-2

Try one...I just ordered three Paint it, beat it or write it bad checks, but you have to get one ! Below is a picture of the "Perfect Cupholder":

DSCF7777.jpg

[Clicker1944]

Mine's prettier na, na, na, na, nah!
It has a lime green button.

[SpyderAnn01]

I want, but they won't ship to Canada....bummer

You Canadians take no drinking and driving to the max!

[Hawk]

I'm sure the plastic paint will do, but there is a product called Duracoat that people use to paint their composite frames on firearms that is really durable, may be a more permanent solution. Unfortunately, its somewhat pricey for a cheap cupholder. But hey, we own Spyders, EVERYTHING is expensive!!!