Results 1 to 7 of 7

Thread: Mounting flags

  1. #1
    Registered Users
    Join Date
    Apr 2012
    Location
    Griffin, GA
    Posts
    5
    Spyder Garage
    0

    Default Mounting flags

    Has anyone found a simple way to mount flags on the Spyder??? My 2011 red spyder has no luggage racks so now what? Any ideas would be appreciated.

  2. #2
    Blazing Member fastfraser's Avatar
    Join Date
    Feb 2009
    Location
    Orangeville, Canada
    Posts
    4,001
    Spyder Garage
    0

    Default

    Flag mounts available for licence plates and or trailer hitches. I've used this on my RS and RT .
    Happy Owner






  3. #3
    Very Active Member Cavman's Avatar
    Join Date
    Jan 2012
    Location
    Menlo, GA. 'Lookout Mountain'
    Posts
    3,811
    Spyder Garage
    0

    Default

    I've has the large SpyderFest flag on my RT mounted on the bottom of the antenna. I used zip ties to secure it and put a couple above the flag on the antenna to keep it from riding up. It's been on there for almost a month with no problems.
    Just make sure your antenna is down tight.

  4. #4
    Invalid Emails
    Join Date
    Mar 2011
    Location
    NE TN
    Posts
    1,192
    Spyder Garage
    0

    Default

    Quote Originally Posted by Papa Burn View Post
    Has anyone found a simple way to mount flags on the Spyder??? My 2011 red spyder has no luggage racks so now what? Any ideas would be appreciated.
    Papa, RT or RS? You might go look at ISCI (scroll down the page when you get there). Same part# for RT and RS. Pricey but folks have been happy with them. That is if you are looking at the small flags. Personally, I would not tie anything on the antenna.

    BTW, Welcome aboard. Join us at one of our "Meet-and-Eats".
    Last edited by Yol Bolsun; 04-12-2012 at 09:55 PM.

  5. #5
    Active Member minerdoug's Avatar
    Join Date
    Apr 2011
    Location
    Fernley, Nevada
    Posts
    51
    Spyder Garage
    0

    Default

    I have a Riva dual flag holder that mounts behind the license plate with adjustable poles. A lot of the fixed poles will hit the trunk when mounted on the license plate area.

  6. #6
    Very Active Member captblack's Avatar
    Join Date
    Oct 2011
    Location
    Woodbine, GA
    Posts
    531
    Spyder Garage
    0

    Default

    I have a luggage rack I got from Inspector Gadget. I mounted two flags (11x15) to it and everything seems to work well. Gusty winds will cause the one on the right to hit the antenna but seems to fly just fine.
    Bill
    Pride Runs Deep Semper Tacitus

    An armed man is a Citizen; an unarmed man is a subject....

    2017 F3 T SE6
    2015 Vulcan Vaquero ABS
    ALR Chapter 401 (Hilliard FL)
    GA & FL Patriot Guard



  7. #7
    Very Active Member bullant12's Avatar
    Join Date
    Oct 2010
    Location
    Somewhere out there...
    Posts
    3,327
    Spyder Garage
    0

    Default

    I have the Rumbling Pride Cruiser Class Mounts (CCM) on my RT and riveted another set into a metal extention for my RT 622 Trailer. When you install them on the RT, you will have to twist them out a little since out of the box the tips bump into the back end, below the truck opening.

    Oh, and
    May all your encounters with the law begin with the words: "nice trike!".[/B]
    2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).

    Previously owned:
    2010 Can-Am Spyder RT SM-5
    2011 Can-Am Spyder RS-S SM-5
    2013 Can-Am Spyder RT-S SM-5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •