-
BRP DEMO DAYS Charlotte NC -at Concord Mills. May 12th -Wacky hosting lunch
UPDATE: Make sure you give me a loose RSVP for lunch... I'm hosting on SATURDAY the 12th, not buying!
CONCORD MILLS MALL May 11 - May 13
8111 CONCORDS MILLS BLVD.
CONCORD, NC 28027
Lunch meet at 11:30am Saturday May 12th. 13th is mother's day and I have 15 trees down in the yard now. .. so I need to clean up on Sunday.
The plan is to meet for lunch a bit early to get enough seats. So far the lunch is planned for Quaker Steak and Lube which is across the bridge from the BRP event. If anyone thinks there is a better venue, let me know.
Quaker Steak & Lube 7731 Gateway Lane Northwest, Concord, NC 28027 (704) 979-5823 ()
http://maps.google.com/maps?q=Quaker...d,+NC&t=m&z=15
No promises, but I'm pretty sure I can get my wife Terri to bring Leah up to lunch and meet everyone for a change.
So... Please RSVP here in this thread. I started a discussion in the NC thread, but wanted to capture many of you that only surf the general forum. If you RSVP and can't make it, we'll miss you, but please let me know if your plans change. I want to make sure we can all sit together - even if that means finding a different place for grub.
Last edited by WackyDan; 05-07-2012 at 02:12 PM.
-
Well, if Wacky is hosting, then I guess Crazy should show up. I do plan to come, but we shall see what fate has in store in terms of weather, etc.
-
Leslee & Ron Turner plan to be there. Hopefully we won't be late because Ron is doing a NASCAR Ride Along Experience in the morning.
-
spydergurl & bigdog69 plan to be there.
-
Active Member
Originally Posted by WackyDan
CONCORD MILLS MALL May 11 - May 13
8111 CONCORDS MILLS BLVD.
CONCORD, NC 28027
Lunch meet at 11:30am Saturday May 12th though I can do the 13th if there is more interest.
Quaker Steak & Lube 7731 Gateway Lane Northwest, Concord, NC 28027 (704) 979-5823 ()
http://maps.google.com/maps?q=Quaker...d,+NC&t=m&z=15
No promises, but I'm pretty sure I can get my wife Terri to bring Leah up to lunch and meet everyone for a change.
The wife and I can ryde ours up on Sunday after church. Saturday we are both booked, but would love to see what BRP is demoing and meet any other NC ryders.
Paul "Wingman" Metheney
2020 Can-Am Spyder RT Limited
-
Yes for Lunch!
Count Linda and me in on the lunch at Quaker state! Cheers, Ron
-
Rayelljay will be there....weather permitting.
-
Bump for visibility.
-
plan on being there (if i can wake up that darn early 2 days in a row!).
-
Originally Posted by WackyDan
CONCORD MILLS MALL May 11 - May 13
8111 CONCORDS MILLS BLVD.
CONCORD, NC 28027
Lunch meet at 11:30am Saturday May 12th though I can do the 13th if there is more interest.
The plan is to meet for lunch a bit early to get enough seats. So far the lunch is planned for Quaker Steak and Lube which is across the bridge from the BRP event. If anyone thinks there is a better venue, let me know.
Quaker Steak & Lube 7731 Gateway Lane Northwest, Concord, NC 28027 (704) 979-5823 ()
http://maps.google.com/maps?q=Quaker...d,+NC&t=m&z=15
No promises, but I'm pretty sure I can get my wife Terri to bring Leah up to lunch and meet everyone for a change.
So... Please RSVP here in this thread. I started a discussion in the NC thread, but wanted to capture many of you that only surf the general forum. If you RSVP and can't make it, we'll miss you, but please let me know if your plans change. I want to make sure we can all sit together - even if that means finding a different place for grub.
I WIll Be There As Long As Plans Don't Change For Me!!!
-
Only 4 hours? this might be a fun fast roll to the NC and back, I will keep you posted!
-
Would be glad to have you. 4 hours? That is just getting warmed up!
-
Saturday no good
Darn...Saturday is no good for me. That is one busy weekend. Darlington Friday. Work Saturday. Maybe Sunday if I can still Move.
-
With Spyderfest over, time to bump this thread... One week till the BRP demo event and Lunch!
Sound off Spyder Ryders!
-
By the way, I rode with a couple last Sunday; they both ride crotch rockets, and she feel very uncomfortable. They were extremely interested in Clyde. I invited them to the demo to take a ryde; they may come down with me. They will probably want to talk with some of you guys who know more about the Spyder than I do.
-
Bump bump bump.
Going to be fun, you'll wish you went if you didn't!
-
Originally Posted by WackyDan
Bump bump bump.
Going to be fun, you'll wish you went if you didn't!
Anybody have a rough estimate of what time they will be showing up at the demo day this coming weekend? and where the first meeting spot is going to be?
-
Active Member
BRP Demo days
We will be at Concord Mills Mall at about 12:45 Sunday, check out the Demo Days thing then go to Quaker Steak & Lube
Paul "Wingman" Metheney
2020 Can-Am Spyder RT Limited
-
unless a personal catastrophe happens i will definitely be there!
-
Originally Posted by WingmanRT
We will be at Concord Mills Mall at about 12:45 Sunday, check out the Demo Days thing then go to Quaker Steak & Lube
jUst everyone remember that I am hosting lunch at Quaker Steak and Lube on Saturday at 11:30 and will be over at the mall both before and after.
-
Originally Posted by WackyDan
jUst everyone remember that I am hosting lunch at Quaker Steak and Lube on Saturday at 11:30 and will be over at the mall both before and after.
Planning on making the trip as of right now - will know 100% for sure on Thursday. Just one of me...
-
Leslee & Ron Turner will be at demo rides before having lunch on Saturday at 11:30. Probably stop at demo rides Friday afternoon after 3:00. Riding with staysafeonline and KipDM, hopefully.
-
Dan,
Vickie and I will be there at 11:30 or a little before. Duck (Anita) is coming with us. Looks to be a great day, weatherwise. Be careful.
Nick
-
Originally Posted by Leslee
Leslee & Ron Turner will be at demo rides before having lunch on Saturday at 11:30. Probably stop at demo rides Friday afternoon after 3:00. Riding with staysafeonline and KipDM, hopefully.
Are they having demO rides today "Friday" if so I'm going after work at three!!!
-
The wife and I will be there.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|