-
Very Active Member
....and we're gonna ride, we're gonna ride.....
ride like the one-eyed Jack of Diamonds, with
the devil close behind,.....we're gonna ride....
2008 GS.....PE # 2888
-
I went with military plates. I wanted the rank that I retired but it was not available so I rearranged it: 3CWO which is Chief Warrant Officer 3. Yes Nevada plate are expensive on matter what you drive. Price is determined by its value as determined by DMV.
-
Active Member
Here's mine which seems to go over a lot of peoples heads.IMG_1958.jpg The GP is the provincial I.D.
-
Active Member
"THE DOG SLED"
2011 Spyder Can Am RTS SM5 (Orbital Blue)
Nuvi 550 GPS With Ram Mount
Drink 2 Go Cup Holder
KewlMetal RT Run-Turn-Brake LED
GloRyder Wolf Paw (in blue)
DMWMS Decal
IPS w/
Alaska Leather Sheepskin Butt Pad
TricLed - Brake Pedal
-
I know..........I'am not normal
Photo01301057.jpg
-
Very Active Member
-
Active Member
-
Registered Users
vanity plate
Originally Posted by akspyderman
It's been a while since we have talked about vanity plates. I am curious to know what is currently out there. May give us some new ideas.
Mine: 2010 RTS: BKWDO (Black Widow)
2009 Vulcan: TILSNO
$50.00 in Alabama. The tag holder is from Beta Designs and can be most anything you dream up.
IMG_7712.jpg
We all have an end to journey toward
however
what will matter most
in the end
was the journey
-
MOgang Member
No picture, but on our Spyder it is RYD4HM...... Missouri doesn't sell vanity plates for trailers, hard to believe that they would miss out on the extra money.
Spyder: 2011 RT Limited w/ RT-622 trailer
Mods: ESI Brightsides, RT Rear Brightsides, HMT Brake Light, Scuff Guards, Utopia Backrest, Chrome, and more Chrome, Pearl White Rear View Mirrors, Rear Fender, and Dashboard, Black Rear Wheel and Belt Assy, SpyderPops Heat Shields & Bump Skid, Elka Stage 1+ Shocks, 2012 SF Graphics, Silver Carbonfiber Dash, Corbin Arm Rests, Baker A.W., BRP Vented WindShield. BR's Sway Bar, Tricled White Halo Lights, BadBoy Air Horn, Spyder Legs Floor Boards
-
Active Member
The cost in North Cakalakee ain't too bad. Mine says "NMYWEB".
Rather carve than cruise.
-
Registered Users
-
Originally Posted by mowin
now thats great... ... i know in NY they have to approve your plate so you dont offend anyone , so not sure WTF would be approved . Some friends of mine tried a few risky ideas over the yrs, but most were shot down..
They have no sense of humor at the DMV here...
-
Very Active Member
Great plates and ideas so far.
Alaska also frowns on plates that may offend. We are the last frontier--so go figure that one.
-
Registered Users
2011 RTS SE5 Chrome Dash Kit, Best Flame Kit, Chrome handle bar end caps, Chrome Tail pipe tip and heat shield, Chrome Handlebar Cover.
-
Because it is one SLICK ryde!
-
I happen to love my vanity plate. I refuse to get NM plates unless I can get the same one I have from NC. TKLDPNK
-
Very Active Member
Spyder #1 - 2008 GS SM5 Premier Edition #1977. RIP after 80,000 miles.
Spyder #2 - 2012 RT SM5. Traded in after 24,000 miles.
Spyder #3 - 2015 F3 SM6. Put 13,000 miles on and sold it.
Spyder #4 - 2017 F3 SM6. Too good of a deal to pass up!
-
Very Active Member
I have also never seen a 666 plate.
-
-
Registered Users
Originally Posted by Firefly
LOL. Michigan won't allow certain things.... and WTF is one of them.
Looking to change mine.... has been MISPY -- for Michigan Spyder..... but no one seems to get it... so need something new...and we're limited to 5 numbers/letters total.
Playing around online I was surprised to find no biker had taken "SATAN" yet..... lol. Can't believe some bad- HD biker dude doesn't have that one.
So my search for the perfect plate continues......
What about MYSPY
Hindle exhaust, Kewlmetal K&N intake + prefilter, Kuryakyn widow pegs, Kuryakyn grips, Madstad 20in. windshield, Juice Box, 02Modifier, Kewlmetal backrest and carrier, missing air dam, missing belt shield, 1" riser, Kewlmetal handlebar risers,Evoluzione sway bar, Street Magic/Day Runner Pucks, Glo Riders Amsoil, 10w40, Rons performance wires
-
Try, BigSeksi
I think anyone rolling a firefly handle and avatar can roll like that, cause I assume you "aim to misbehave"
I know I do.
-
Active Member
Vanity Plate
Originally Posted by Clicker1944
Well, actually it is for KentuckySpyder, you know, the Bluegrass State with the #1 College Basketball team in the COUNTRY!
KYSPYDER
-
aka Buffalo Bill
My 2011 RSS SM5 Mods all self installed: Spyder Detailing Graphics, Madstad, Kewlmetal risers, Rivco Driver Floorboards, Evoluzione Sway Bar, 25" Touring Windshield, 2010 RT Shocks, Hindle Exhaust, Isci Handbrake, Kurakyn Grips , Rivco Passenger Floorboards, Tricled fender tips and fender lights. Rivco license plate flag holder. BRP backrest. ESI tail light lens.
-
Teddys favorite human
How did u get a Custom Plate for your trailer in KY? Teddy even begged & was told NO
Originally Posted by johnwinslow
my spyder and my wifes bmw you will like this one cincy
LOVE IT!
Originally Posted by kyspyder
Here are my plates for the Spyder & it's trailer.
KYSPYDER
I was told that if I didn't take the trailer out of state, I didn't even need a plate for it. Since we usually take Teddy's camper on all of our cross country road trips, I knew it was best to get one, so I wanted to get RUFnIT (get it- Teddy's dog house on wheels-LOL) but even with Teddy give'n out "high 5s" to all the DMV ladies (whom ALL Love him) we were told you can't get Personalized or Custom Plates for a camper or trailer in KY So, whats your secret ? do tell ???
-
RT-S PE#0412
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|