-
SpyderLovers Founder
-
Motorbike Professor
It really accents the look of those black flames.
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
bump skid
Bump Skid looks nice on that white. Looks factory!
-
Registered Users
Pretty nice!! Sure does look like it belongs there!
-
Very Active Member
Possum Pusher certainly should be the official name in Tennessee
220,000 Mile Spyder Ryder, IBA Premier member #59352, Saddlesore 1000 (11), Bun Burner 1500 (3), Saddlesore 2000 (2), Bun Burner Gold, MILEEATER SILVER
-
MOgang Member & Monster Member
Looks great!
I can't wait to install mine!
-
Very Active Member
Did you install in place or did you remove the trunk?
Thanks
Randy
-
SpyderLovers Founder
Originally Posted by bluestratos
Did you install in place or did you remove the trunk?
Thanks
Randy
It installs in place.
-
Put mine on a few days ago. Now if I had a plow up front I could ride.
-
Very Active Member
Originally Posted by Lamonster
It installs in place.
Any holes need to be drilled or does it use existing mounting holes? This mod looks to be on my list this Spring.
MODS: Elka Shocks, ESI RT HMT Brake Light, ESI RT Brightsides, ESI Fender TIPS, ESI RIPS, ESI RT Day Runners, Grip Puppies
AmerSeal Sealant, KewlMetal Kewlock, Scorpio I900 Security System, Stebel Nautilus air horn, KewlMetal Highway Brackets & ISO Wings
Corbin seat, trunkrest & driver backrest, Capt.Jim's Belt Tensioner, SpyderPops LaBlock, Cat Shields, Bumpskid & Belt Guard
Seal PUP Floorboards, BRP chrome, Ron's Anti-Sway Bar, Lamonster LED Head/Fog Lights & BRP Air Scoops
-
SpyderLovers Founder
Originally Posted by Y Rider
Any holes need to be drilled or does it use existing mounting holes? This mod looks to be on my list this Spring.
There are four indexing holes that you use to drill the front holes. You do have to drill the front holes.
-
Now that, I like. Your pics showed me what I hadn't seen on SpyderPops. Thanks!
-
Registered Users
-
Active Member
Install In Place
Would you please explain the meaning of Install In Place............thanks
-
Very Active Member
-
Pssum Pusher
Certainly applies to Georgia. Will look to get one installed in Cuba. Looks good.
-
I think I need one, my new driveway looks a little steep.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Registered Users
Any plans for an RS version?
-
I have led lights under there what about those? have to remove them? or move them?
-
Originally Posted by trxrspyder
Any plans for an RS version?
Yes, see Spyderpops answer here.
-
SpyderLovers Sponsor
Originally Posted by ThreeFeet
I have led lights under there what about those? have to remove them? or move them?
There's always a way! Are your led's on the stock skid plate or just on the frame?
-
Next...
Lamont had me with "Possum Pusher", it totally makes sense (but will it hold up to armadillos?). Where will this end? Roo Bars, Raccoon Racks (oh, no, Bob is getting that from Inspector Gadget).
Last edited by Yol Bolsun; 01-17-2012 at 04:38 PM.
-
Two questions before I drill...
Is there a specific drill type and technique that should be used to drill the front holes into the Spyder body? I don't want it to split or something.
Secondly... can the skid-plate be polished? Mine isn't as clean or smooth of a look as I might have expected due to scuff-marks and things that were on it when I received it. These marks will show when I put it on. (Even on the top-side which is the side that will show around the front edges.)
Thanks for any input on this.
SL #7026
VBA #652
HOG #3935417
2011 Viper-Red Spyder RT SE5 & Trailer
2017 HD Ultra Limited
Former Rides: 2014 HD Ultra Limited; '04 Kawa Nomad; '09 HD Ultra-Classic; and many Hondas through the years.
Spyder Newbies Do's & Do Not's: http://www.spyderlovers.com/forums/s...-Spyder-owners
-
Registered Users
Originally Posted by Illinois Boy
Two questions before I drill...
Is there a specific drill type and technique that should be used to drill the front holes into the Spyder body? I don't want it to split or something.
Secondly... can the skid-plate be polished? Mine isn't as clean or smooth of a look as I might have expected due to scuff-marks and things that were on it when I received it. These marks will show when I put it on. (Even on the top-side which is the side that will show around the front edges.)
Thanks for any input on this.
1/4 in drill bit works fine, sharp bit works better. My suggestion, and I would have done it this way if I knew to do it this way, get the thing in place with the back bolts and drill a way up front hole. Then put the clip on and screw it in to keep it in place when doing the other holes, I had a couple that for some reason where not quite right. No ideas about polishing, but if it's bad I'm sure he will replace it fast. This is an easy to do 1 man job, and if you want to bling it up a bit there is a bit of a gap between the bumper and the skid plate that is yearning for some LEDs.
Corbin saddle
spyderpops block off plate, bump skid, belt guard
IPS
Tricled LED lights all around(too many to name here)
Smoothspyder belt tensioner
Custom Dynamics britesides
VTC floorboards, upper air vents, spoiler
BK car stuff HID upgrade
trailer hitch
Repainted rear fender, trunk latch assembly, switch cluster, gauge cluster
cell phone interface kit
travel cover that no longer fits due to the spoiler
New sway bar
New shock relocator
-
Motorbike Professor
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|