-
Active Member
Christmas Surprise from Hubby
Keith just gave me my Christmas surprise. We had agreed to skip Christmas this year for each other since two Spyders followed us home this year. He put a picture in my stocking of my new Ultimate lowrider with rider backrest. The seat is black with yellow stitching to match Miss Daisy. It is on order and will be here in 4-8 weeks.
This was a big surprise since we had just discussed that we would leave Miss Daisy home for Spyderfest and I could check out different seats while there before ordering. He was sneaky as he had already ordered it. I think the seat is my last mod that I am planning on other than little things (cup holder, maybe some pin stripes).
Thank you, sweetheart. There are more roads ahead for us to check out.
Last edited by sewnonnie; 12-25-2011 at 03:23 PM.
Reason: spelling
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Blazing Member
-
Very Active Member
Originally Posted by sewnonnie
Keith just gave me my Christmas surprise. We had agreed to skip Chirstmas this year for each other sincce two Spyder followed us home this year. He put picture in my stocking of my new Ultimate lowrider with rider backrest. The seat is black with yellow stitching to match Miss Daisy. It is on order and will be here in 4-8 weeks.
This was a big surprise since we had just discussed that we would leave Miss Daisy home for Spyderfest and I could check out different seats while there before ordering. He was sneaky as he had already ordered it. I think the seat is my last mod that I am planning on other than little things (cup holder, maybe some pin stripes).
Thank you, sweetheart. There are more roads ahead for us to check out.
I put one on my wife's Spyder and she loves the seat. I've rode it a few times with the Ulitmate and it puts me a little too close for me, but just right for her. I have the Ulitmate seats on my Valkyrie. We are big fans of the Ulitmate seats.
David
-
Very Active Member
Now that is a Merry Christmas..
220,000 Mile Spyder Ryder, IBA Premier member #59352, Saddlesore 1000 (11), Bun Burner 1500 (3), Saddlesore 2000 (2), Bun Burner Gold, MILEEATER SILVER
-
Active Member
naughty or nice?
Originally Posted by fastfraser
Now were you Naughty or Nice to score the seat ?
It depends...a little of both, most likely.
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Registered Users
Nice!!! If I ever go for a custom seat it's likely to be the Ultimate Lo Rider. Hope you enjoy it very much!! Post up a review when you get it installed. How tall are you? I'd be interested in knowing how it fit someone 5' 4. That's what I am.
Congrats and Merry Christmas!!!
-
Active Member
Originally Posted by DynamoBT
Nice!!! If I ever go for a custom seat it's likely to be the Ultimate Lo Rider. Hope you enjoy it very much!! Post up a review when you get it installed. How tall are you? I'd be interested in knowing how it fit someone 5' 4. That's what I am.
Congrats and Merry Christmas!!!
I'm 5'2". Hope to have it by end of January, early February. I am expecting it to be much more comfortable thanthe standard GS seat. It was the only seat that I found in my research MEANT for "vertically challenged" ryders LIKE ME.
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Active Member
Early arrival?
Keith got an email yesterday that might seat ceared customs from Canada. It may be here next week.
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Very Active Member
on the new seat. Please send pictures once you get it installed.
-
Active Member
It is here!!
Keith added the seat yesterday. It is so nice. I hope to put a few miles on Miss Daisy tomorrow since I am off. Hoping the rain wil hold off at leas part ofthe day. I will take pics tomorrow
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Active Member
Ultimate Low Rider with Yellow stitching
Here is my Ultimate Lowrider (moved me forward 2") with yellow stitching and Rider backrest.
UltimateLowRider.JPG
Last edited by sewnonnie; 02-04-2012 at 07:04 PM.
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Registered Users
That is a really nice looking seat!!! With it being 2" closer, just how much "butt room" do you have?? I may be short waisted, but I'm not "small". Though, I might go for the lo-rider just for the increased passenger room. I wouldn't get the driver backrest because it doesn't look like there is enough room for the passenger with it installed.
Please do post a review after you get a few miles on it!!! Very sharp looking!!!!!
I just thought of something. Would you be willing to measure the seat from the high center point where it meets the tank to the base seat pan where the lip like backrest of the driver begins?? That would give me a really good idea of whether to go for the lo-rider or normal cut if/when I get this seat. Thank you so much if you have time to do this!!!!!
Last edited by DynamoBT; 02-04-2012 at 07:15 PM.
-
Active Member
measurement
Originally Posted by DynamoBT
I just thought of something. Would you be willing to measure the seat from the high center point where it meets the tank to the base seat pan where the lip like backrest of the driver begins?? That would give me a really good idea of whether to go for the lo-rider or normal cut if/when I get this seat. Thank you so much if you have time to do this!!!!!
It is 11 1/2 inches for that measurement.
2008 yellow SM5, PE#488
ESI 4" risers
Can-Am 23" Ultra-touring windshield kit
Can-Am fog lights
Flash-2-Pass garage door opener
Givi E460 top case with Admore LED kit
Spring release on frunk
Kewl Metal mirror extensions
Spyder Lovers license plate frame
Ultimate low rider seat with rider backrest and yellow contrast stitching
Custom Dynamics Double Feature Lens Tail Light
TricFenderz (Led lights) in amber/red
-
Registered Users
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|