-
Restless Member
-
Very Active Member
Originally Posted by ezduzit
I have a 2010 RS SM5, when I first bought it she started in any gear as long as I had the clutch engaged. Reason I know this is when I first started riding I would stall out all the time . Took my spyder for her first 600 mile service and a couple days later I went to start the bike and....nothing. I kept trying,removed the key,waited,let the mode scroll through,still nothing. I finally shifted it into neutral and BAM!!! She started up. Now I have to always be neutral to start it. On occasions (I am human) I stall out in traffic and I must cycle through all the gears find neutral to start her up. Boy that's embarrassing and dangerous!!! Does anybody know if this is normal and is it possible that the dealer disengaged a sensor or part somewhere!!! Thanks for your help!!!
Back to the dealer... Unless Scotty or any of the good people here have another answer. But I can get my SM-5 started in 1st, 2nd and Reverse.
May all your encounters with the law begin with the words: "nice trike!".[/B]
2015 Can-Am Spyder F3-S SM-6 Can-am Red/Black SM-6 with 2010 Black RT-622 trailer (hitch in the works).
Previously owned:
2010 Can-Am Spyder RT SM-5
2011 Can-Am Spyder RS-S SM-5
2013 Can-Am Spyder RT-S SM-5
-
I was under the impression that it'd start anytime as long as you've got your foot on the brake...?
-
Very Active Member
Check the mico switch at the clutch lever and make sure it clicks for an easy check.
States We Have Been To On Our Spyder
My mods: Green filter, Air box mod., Muzzy exhaust, Cat Bypass, Exhaust Heat Wraped, Powder coated all Bare Metal surfaces, Capt. Jim`s Belt Tensioner, Custom Built Highway Pegs, Elka front shocks, RS-S rear shock, 2011 smaller windshield, Dynojet PowercommanderV & Autotune, NGK iridiom DCPR9IEX spark plugs, Maxxis MA-Z4S Victra rear tire, General Altimax HP 185/60R14 front tires, Corbin seat & backrest, BRP hitch. I need to stop!
-
-
Very Active Member
Originally Posted by Bob Denman
I was under the impression that it'd start anytime as long as you've got your foot on the brake...?
The foot on the brake thing doesn't apply to SM5, only SE5
220,000 Mile Spyder Ryder, IBA Premier member #59352, Saddlesore 1000 (11), Bun Burner 1500 (3), Saddlesore 2000 (2), Bun Burner Gold, MILEEATER SILVER
-
Active Member
It is definitely the micro switch! I had the same exact problem with my RTS Limited. The micro switch is located on the handle bar and when you pull in the clutch you can see it engage(click). However, just because it clicks does not mean it is working correctly. Take it back to the dealer and have the micro switch replaced.
-
-
Very Active Member
When I had my SM5 I always left the bike in first and never used the parking brake. It always started for me with foot on the brake and clutch held in.
-
Does anybody here have the BRP part number for the sidestand switch??
-
-
Motorbike Professor
As was said...clutch switch. Often it is just a problem with the trip lever having been bent when cleaning. You can usually bend them back carefully. There have been a couple of clutch switches that came loose, however, and a few that have failed. The dealer can test the switch via BUDS.
-Scotty
2011 Spyder RTS-SM5 (mine)
2000 BMW R1100RTP, motorized tricycle & 23 vintage bikes
2011 RT-622 trailer, Aspen Sentry popup camper, custom motorcycle trailer to pull behind the Spyder
Mutant Trikes Forever!
-
Very Active Member
Spyder only starts in neutral???
The clutch lever micro switch on my 2010 Rt had the same problem,
I sprayed a little contact cleaner into the switch and clicked several times by hand and carefully bent the arm on switch and added a small length of neoprene hose on arm on clutch lever to give more travel to switch,
No more problems with starting...Hope this helps you.....
Freebob...
-
Very Active Member
States We Have Been To On Our Spyder
My mods: Green filter, Air box mod., Muzzy exhaust, Cat Bypass, Exhaust Heat Wraped, Powder coated all Bare Metal surfaces, Capt. Jim`s Belt Tensioner, Custom Built Highway Pegs, Elka front shocks, RS-S rear shock, 2011 smaller windshield, Dynojet PowercommanderV & Autotune, NGK iridiom DCPR9IEX spark plugs, Maxxis MA-Z4S Victra rear tire, General Altimax HP 185/60R14 front tires, Corbin seat & backrest, BRP hitch. I need to stop!
-
Restless Member
-
Very Active Member
States We Have Been To On Our Spyder
My mods: Green filter, Air box mod., Muzzy exhaust, Cat Bypass, Exhaust Heat Wraped, Powder coated all Bare Metal surfaces, Capt. Jim`s Belt Tensioner, Custom Built Highway Pegs, Elka front shocks, RS-S rear shock, 2011 smaller windshield, Dynojet PowercommanderV & Autotune, NGK iridiom DCPR9IEX spark plugs, Maxxis MA-Z4S Victra rear tire, General Altimax HP 185/60R14 front tires, Corbin seat & backrest, BRP hitch. I need to stop!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|