o 2 mod

[napper39]

ive looked at all the things on the 02 modifer but no pictures of where to plug in the thing that goes under the seat i would prouble pluge it in the wrong deal , i need a picture where it plugs in too.i looked under there and theres a lot of wires nad things please show me a picture.what does it look like.?

[ataDude]

Four steps:

1. Remove the dull plastic cover from over the rear wheel. Trace the wire from the O2 sensor in the collector pipe to its connector behind (toward the center of the bike) the battery. Disconnect.

2. Remove O2 sensor and insert provided plug into the pipe.

3. Install O2 eliminator and connect to the connector behind the battery that was mentioned above.

4. Reinstall the plastic cover over the rear wheel.

[napper39]

if i knew what the conector behinde the battery looked like ,i would do that but i have no idea what to look for.is there something all ready connected there i need to remove befor i plug this in or is it ready for this to be conected to.????

[fastfraser]

Remove the panel above the rear tire ( 7 torx screws ) now look at your muffler and at the elbow you will see a wire attached to the muffler ( oxygen sensor ) follow that wire up under the rear tire until you find a connection. Undue this connection and plug your o2 modifier into that connecter.The wire you followed from the muffler is not required any more and you should pull it back and take the oxygen sensor out of the muffler and insert the included plug into the hole .


Hope this helps !

[napper39]

i think i have it.i didnt know there was a wire running from the sesner on the muffler,so ill do that way.thanks for all the info. i just hope its that simple,follow the wire.im going to dp it.

[Big Bird]

just got mine done... what a difference... power on demand and no more popping and craking from the Micron exhaust...
Happy Spyder boy here!!!
Glenn as Big Bird

[BLACK WIDOW]

Four steps:

1. Remove the dull plastic cover from over the rear wheel.Trace the wire from the O2 sensor in the collector pipe to its connector behind (toward the center of the bike) the battery. Disconnect.

2. Remove O2 sensor and insert provided plug into the pipe.

3. Install O2 eliminator and connect to the connector behind the battery that was mentioned above.

4. Reinstall the plastic cover over the rear wheel.

That makes it easy

[canam9]

Is this still needed on the 09' 10's?

[Sny]

yep

[ataDude]

That makes it easy

I thought so but apparently not.

.

[stormtrooper]

Just did my o2 mod super easy to do will try out tomorrow.

[SpyderSteve]

Thanks for the info. I am going to install mine tomorrow [Sat.] With my new hmf exaust

[truck 85]

how does this effect the mileage.

[alist]

how does this effect the mileage.

can anyone tell me where to get the o2 eliminator kit...can you send link

[SpyderSteve]

welcome I don't know how to post links but here is the website where mine came from [evoluzione cyclesports]

[Some Guy]

can anyone tell me where to get the o2 eliminator kit...can you send link

welcome

http://www.evoluzione.net/evo-cycle-can-am.htm

It really made a huge difference on my Spyder. I'm very happy with it.

[SpyderWolf]

Thanks for the info. I am going to install mine tomorrow [Sat.] With my new hmf exaust

If you get a chance, can you post a video of the HMF exhaust? I would like to hear what it sounds like as well. I currently have a Hindle, and am interested in what some of the other systems sound like now.

[SpyderSteve]

If you get a chance, can you post a video of the HMF exhaust? I would like to hear what it sounds like as well. I currently have a Hindle, and am interested in what some of the other systems sound like now.

I haven't been on the road yet it's raining up here But i like the sound so far. I got this clip off youtube
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/NJ-w6ipx1tQ...</param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/NJ-w6ipx1tQ?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

[Just Doo Me]

how does this effect the mileage.

I found with adding the 02 eliminator you do lose a little mpg nothing drastic,but the trade off is worth it in my opinion.

[SpyderWolf]

I haven't been on the road yet it's raining up here But i like the sound so far. I got this clip off youtube
http://www.youtube.com/v/NJ-w6ipx1tQ?fs=1&amp;hl=en_US

Thanks, that does have a good sound to it and apparently will not climb above 108 decibels, which would be a good thing. I am thinking a yellow one might look good on my Spyder.

[SpyderSteve]

I just went for a 45 minute ride really love the sound of the exaust, and no popping etc. with the o2 mod And the real bonus about the Hmf was my neighbours didn't give me the dirty looks like i got with the Micron

[SpyderWolf]

I just went for a 45 minute ride really love the sound of the exaust, and no popping etc. with the o2 mod And the real bonus about the Hmf was my neighbours didn't give me the dirty looks like i got with the Micron

Good deal. The heat shields on my Hindle are loose again, and it is really starting to bug me. I am not sure how many times I will be able to put new rivets in before that solution will not work anymore. This is really not acceptable for the price of the can. When I get truly fed up I will most likely go this route. The yellow carbon fiber looks pretty darn good as well, and may even fit in better on my Spyder, just need to figure out which tip and color for it.

[SpyderSteve]

I saw a yellow hmf with a k&n air filter for 273.95 on ebay. Good luck

[stormtrooper]

Did o 2 mod friday and rode spyder sat and sun.Runs great no more backfiring on decel and my idle is less erratic.Great mod.

[SpyderWolf]

Did o 2 mod friday and rode spyder sat and sun.Runs great no more backfiring on decel and my idle is less erratic.Great mod.