Garmin Zumo 550 brackets

**Mad Matt** · 02-22-2010, 06:46 PM

Our bracket design is done. We will have these in production in about 2 weeks.

Garmin 550 bracket

Mad Matt

**strats** · 02-22-2010, 07:07 PM

Great news Matt

**chasen_racen** · 02-22-2010, 08:43 PM

Looks Great, That is exactly the mount I have been looking for.

**Jester** · 02-22-2010, 09:01 PM

I assume the new 660 will be able to fit this bracket. If so, count me in!
Cappy

**Wheeler~** · 02-22-2010, 09:51 PM

Originally Posted by Mad Matt

Our bracket design is done. We will have these in production in about 2 weeks.

Garmin 550 bracket

Mad Matt

Fantastic. I want 1 for sure. Can I assume it's an easy install? Whether it is or not, I'm down for 1!

**Jornie1** · 02-22-2010, 10:01 PM

'Zzzzactly what I've been looking for....(IF??) it will also take the Zumo 660. I've tried every way I know of to find out how to mount the 660 in the exact spot you show here. My dealer doesn't know... BRP won't give us an answer... You be 'da man!!! Count me in... Len

Originally Posted by Mad Matt

Our bracket design is done. We will have these in production in about 2 weeks.

Garmin 550 bracket

Mad Matt

**Mad Matt** · 02-22-2010, 10:11 PM

I have not tried the 660 just because I don't have one, but I think it will be a direct bolt on with the hole patterns I have.

Installation is very simple. Just remove 2 bolts from your handlebars, and install longer bolts with spacers and our bracket.

Matt

**vwatso** · 02-22-2010, 11:31 PM

Matt,
I bought the new Garmin 660 with my new rts. but, I also have the Tom Tom Ryder 2 that was on my 08 that I used with My kewl center console with brackets you had made. Just wondering if you can make new brackets to fit it on my rts?

Thanks,

**Mad Matt** · 02-23-2010, 12:19 AM

Victor,

If you have the Garmin, then I think it would be a bit of work to swap between the 2.

Mt RT handle bar setup will have multiple gizmo mount spots just like my adjustable risers and my RS handlebars. So when you install my RT handlebars, you will have the best of all worlds.

Mad Matt

**dave01** · 02-23-2010, 03:45 AM

Thanks Matt. My order has been placed for the bracket. You guys are much quicker than BRP for making these available.

**MarkLawson** · 02-23-2010, 12:05 PM

I ordered one today. Thanks!

**vwatso** · 02-23-2010, 04:57 PM

Matt,

Great to know. Can't wait to get the new rts all decked out. I'm also wondering about grips on the new RTS? You had powder coated and sold me the iso's on my 08. I'm hoping it will be possible to do a similar setup with the 2010?

Thanks,
vwatso

**Wheeler~** · 02-23-2010, 07:36 PM

Just purchased mine today and really looking forward to seeing the finished product. Was afraid it would be located somewhere awkward and unsightly.

**NancysToy** · 02-23-2010, 09:44 PM

Originally Posted by vwatso

Matt,

Great to know. Can't wait to get the new rts all decked out. I'm also wondering about grips on the new RTS? You had powder coated and sold me the iso's on my 08. I'm hoping it will be possible to do a similar setup with the 2010?

Thanks,
vwatso

I would be surprised if you can change out the grips readily. They are assemblies that bolt on, due to the heaters and the electronic throttle. It may be possible, but it is no longer a simple slip-on. Let us know what you figure out.

**Jester** · 03-05-2010, 09:14 PM

Kind of in a hurry to get something going (cannot find anything anymore with a good GPS) so I fabricated a quickie mount out of some all thread rod and a friend made a nice little plate to hold it.

Now taking RT 101 trying to learn how to get a hot wire for power. They did a good job trying to keep us fools from fooling with it!

Finally figured out how to upload the Picture

**Wheeler~** · 03-05-2010, 11:12 PM

Originally Posted by Jester

Kind of in a hurry to get something going (cannot find anything anymore with a good GPS) so I fabricated a quickie mount out of some all thread rod and a friend made a nice little plate to hold it.

Now taking RT 101 trying to learn how to get a hot wire for power. They did a good job trying to keep us fools from fooling with it!

Don't know how to upload a picture so I put it in the signature. Hope it works out.

I don't think it worked.

**Jester** · 03-05-2010, 11:50 PM

Thanks Wheeler. Apparently it did not. If I click on my avatar, it pops up for me. Sometime next week I will try to learn how to upload pictures.

Got the wiring figured out tonight and will get a chance to ride with others for the first time tomorrow.

My friends have never seen a

so I will have fun and feel a little sorry for them!

**Wheeler~** · 03-06-2010, 10:59 AM

Originally Posted by Jester

Thanks Wheeler. Apparently it did not. If I click on my avatar, it pops up for me. Sometime next week I will try to learn how to upload pictures.

Got the wiring figured out tonight and will get a chance to ride with others for the first time tomorrow.

My friends have never seen a

so I will have fun and feel a little sorry for them!

Why feel sorry for them?

After seeing yours, they'll have no excuse for not getting their own.

Until then I guess you could feel sorry for them.

'til then "you be da man."

I hope you can upload those pics soon.

**dave01** · 03-08-2010, 09:44 AM

Matt, Any update on when these will be ready for shipping? Thanks, Dave01

**Mad Matt** · 03-08-2010, 04:04 PM

Dave01,

All the steel pieces should be arriving tomorrow. IF we can get them through powder coat tomorrow, they will start shipping late this week. We are trying our best to make that happen.

Matt

**dave01** · 03-08-2010, 04:26 PM

Originally Posted by Mad Matt

Dave01,

All the steel pieces should be arriving tomorrow. IF we can get them through powder coat tomorrow, they will start shipping late this week. We are trying our best to make that happen.

Matt

Sounds great. Thanks again

**Mad Matt** · 03-09-2010, 06:45 PM

The Installation instructions and video for the RT bracket are done.

How to Video

Instructions

We will start shipping these in a day or 2.

Matt

**ThreeWheels** · 03-15-2010, 10:23 PM

Originally Posted by Mad Matt

The Installation instructions and video for the RT bracket are done.

How to Video

Instructions

We will start shipping these in a day or 2.

Matt

Great. I've already installed the power and the audio cables. When can I expect my bracket ?
Incidentally, posting the video instructions is exceptional.

**Mad Matt** · 03-16-2010, 10:00 AM

Originally Posted by SKS06460

Great. I've already installed the power and the audio cables. When can I expect my bracket ?
Incidentally, posting the video instructions is exceptional.

My warehouse crew told me these have begun to ship. If you want specifics, use the webstore contact link to ask for a status on your order. use your web order number when you ask.

contact link

Matt

**Jornie1** · 03-16-2010, 10:23 AM

Here is the reply I just received from BRP's Stephane Bertrand, district sales manager for Florida, when I asked him personally to see if the 660 mount could be purchased directly from BRP..... Len
Hello Len,
I validated with BRP right to the source and the brackets are not available separate. The way the purchase agreement was done between Garmin and BRP is that mount and GPS are sold together. Maybe you could find someone that could machine you the part? Sorry I couldn't help.
Thanks

Stephane

Originally Posted by Mad Matt

Our bracket design is done. We will have these in production in about 2 weeks.

Garmin 550 bracket

Mad Matt

Thread: Garmin Zumo 550 brackets

Thread Tools

Display

Garmin Zumo 550 brackets

Perfect

GPS Bracket

Oh Yesssss

Tom Tom Ryder 2

Kewl products

Garmin 478

GPS mount information directly from BRP

Posting Permissions