|
-
Member
 Where can I buy Lamonster Brake Rods?
Okay ... this old man is not all that tech savvy. I read somewhere while waiting to pick up my F3 about the Lamonster brake rods and how they "lower" the brake position.
Anyway, I have now picked up the New to Me 2019 Spyder F3 Limited. It has the position 4 rod, and that seems fine, just want to "lower" the brake height to make braking more ergonomic.
Now I can't find where to purchase these.
Thanks in advance ... wish they made "seeing eye bots" for us old folks ... LOL
Disclaimer ... spent about an hour searching ... never been good at that.
Last edited by Peter Aawen; 10-26-2023 at 03:29 PM.
Reason: Expanded title to briefly ask the question; & using 'rods' not bars will help. ;-)
-
Very Active Member
Go to Lamonstergarage.com. Lamont sells the #4 rod that will lower your brake pedal.
https://www.lamonstergarage.com/can-...-f3-brake-rod/
Last edited by Peter Aawen; 10-26-2023 at 03:31 PM.
Reason: Link
 2020 F3 Ltd
Spyderpops Bumpskid
Spyderpops Brake/Run/Turn Signal LED's
Lamonster Garage LED Fog Lights and Headlights
2013 ST-S retired 1/9/16 at 25,061 miles
2015 F3S sold at 77,565 miles.
-
Very Active Member
Ya, I see what you mean, I just tried to look them up on the warehouse I use for you, the website was not really helpful. I would say your best means of getting that rod right for you would be your dealer or find a welder that wants to work with you and get it right for you. It should not be that big of a deal to fine tune that for you. Good Luck!
Last edited by Peter Aawen; 10-26-2023 at 05:48 PM.
Reason: ... on for you and the ... ;-)
-
If you haven't already ordered one from Lamonster, I'm selling a brand new one - Lamonster Brake Rod #4. I got it to try over my #3 but it stretched my legs out too much so doesn't work for me.
https://www.spyderlovers.com/forums/...26#post1689126
Last edited by Peter Aawen; 10-26-2023 at 03:32 PM.
Reason: break... + link ;-)
-
Very Active Member
1st up. I would be very careful with lowering the pad.
It has to be able to operate the brake.
I put an adjustable one on mine. Works well.
I had a 4 on it when I bought it. Then made a 5. Bought the one below.
I raised the pedal so I could get my foot under the pad when just kicking along. Try it - you may like it.
It may work for you and the braking is controlled.
You have to lift your foot in a car, after all . Majic. 
canam-spyder-f3-adjustable-brake-rod-spyderextras-glow.jpg
Click the link below for info.
https://www.slingmods.com/canam-spyd...able-brake-rod
Last edited by Isopedella; 10-26-2023 at 12:32 PM.
-
Very Active Member
 Originally Posted by Mikey
Ya, I see what you mean, I just tried to look them up on the warehouse I use for you, the website was not really helpful. I would say your best means of getting that rod right for you would be your dealer or find a welder that wants to work with you and get it right for you. It should not be that big of a deal to fine tune that for you. Good Luck!
Why wouldn’t you simply go to the Lamonster website to buy the modified Lamonster brake rods, Mikey?
https://www.lamonstergarage.com/can-...-f3-brake-rod/
Pete
Last edited by Peter Aawen; 10-26-2023 at 05:49 PM.
Reason: Fixed quote display ;-)
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
