-
Anyone Cut open a F3S muffler?
Has anyone cut open a F3S muffler? I might modify my muffler a bit. Curious what is inside.
Last edited by Peter Aawen; 10-23-2023 at 10:07 AM.
Reason: Expanded title to briefly ask the question... ;-)
-
Active Member
Might be an expensive venture if it turns out the wrong way. No turning back at that point. I've done it before with a few of my 2 wheelers (with success). The key is to start small, test for sound, and then adjust as necessary. JMHO.
Last edited by Dasmoetorhead; 10-23-2023 at 04:22 PM.
Reason: +info
Retired U.S. Coast Guard 76-97
Shad bags
Lamonsters 2.0 usb dual power plate
F3 ultimate boards
LED arc lights
Lidlox helmet extender
Lamonsters top cuff with Ram ball and phone holder.
Lamonster billet sway bar end links
BRP driver backrest
LED Volt meter
BIW Cat Delete pipe
Route 129 windscreen
-
Yes, I have done that surgery. It's been a while ago, so I don't recall if I kept photos. From the inlet, the exhaust enters a chamber the full dimension of the muffler by about 3" axial depth. Then there is a baffle plate across the muffler cross-section. There are two perforated pipes projecting axially down the length of the muffler surrounded by heavy fiberglass packing. I believe the tubes projecting from the end cap telescope over the perforated tubes.
I cut the end section out beneath the end cap with cut-off grinder disks mounted to an angle grinder. There are welds near the inlet end which hold that first baffle in place. Cut or drill the welds and the baffle plate can be removed. Weld the holes closed when you're done. I had removed the heat shields, sand blasted the muffler to expose the stainless-steel shell, then reattached the heat shields left painted black.
I've run my 2015 F3-S with the honeycomb and baffles removed from the Secondary Muffler and the guts removed from the Primary Muffler since I got in in early 2016.
Last edited by Peter Aawen; 10-29-2023 at 08:55 PM.
pauly1 - SpyderDeb's 'wrench'
2018 F3-T & 2015 F3-S Road Warrior Foundation Tribute customs
IBA #48220 SS1000 BB1500
2015 F3-S , OEM na Basic Black with Custom Wrap
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|