|
-
 Lamonster Top Cuff w/Cup Holder Hitting Dash Cover on 2023 Sea-to-Sky?
Recently installed a Lamonster Top Cuff with Drink Holder on my new, 2023 Can Am Spyder RT Sea-to-Sky. Absolutely love this add-on, but just noticed that on STEEP turns, the cup holder (Even without a cup in it!) can hit the dash/display cover.
Does anyone else have this issue and how did you work around it? I assume putting a RAM ball in the back with a short arm to get the actual holder out of the way is the only option?
Thanks, in advance, for any insight/tips!
2023 Can Am Spyder RT Sea-to-Sky
2016 Can Am Spyder RT Limited
Crawfordville, Florida
-
Active Member
 Why don't you call Lamonster? It's his design so maybe he has some guidance.
-
 Originally Posted by RonH2K
Recently installed a Lamonster Top Cuff with Drink Holder on my new, 2023 Can Am Spyder RT Sea-to-Sky. Absolutely love this add-on, but just noticed that on STEEP turns, the cup holder (Even without a cup in it!) can hit the dash/display cover.
Does anyone else have this issue and how did you work around it? I assume putting a RAM ball in the back with a short arm to get the actual holder out of the way is the only option?
Thanks, in advance, for any insight/tips!
I have the 2020RTL and Lamonster's cuff with drink holder. I also have the Lamonster handlebar riser kit which gets the handlebars up and back away from the dash approx 2 inches, giving more room between dash & handlebars. No problem with hitting the drink holder.
Last edited by Peter Aawen; 10-21-2023 at 04:42 PM.
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button"
 If in Doubt, Don't Do It!
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
-
Great tip! Thanks! I'm seeing a riser set from Show Chrome, but not a Lamonster-specific one. Would have the same impact, I'm sure.
Thanks, again!
2023 Can Am Spyder RT Sea-to-Sky
2016 Can Am Spyder RT Limited
Crawfordville, Florida
-
Active Member
I have a 2023 sea to sky I put the cup holder inside the handle bar. I had the same issue, so I instal the cup holder inside the handle bar. Problem solve.
IBA # 61125
Saddle Sore 1000
Bun Burner 1500
1st one to do 48/10 on a Spyder
4 Corner Finisher
SCMA Member
-
Very Active Member
Originally Posted by Knizar
I have the 2020RTL and Lamonster's cuff with drink holder. I also have the Lamonster handlebar riser kit which gets the handlebars up and back away from the dash approx 2 inches, giving more room between dash & handlebars. No problem with hitting the drink holder.
Same here. I hadn't thought that not having the riser might be a problem, but I guess it is.
Last edited by Peter Aawen; 10-21-2023 at 04:41 PM.
Reason: he ... ;-)
2022 Petrol Metallic RT Limited / 'PYDER'
Peter Pan has struck again!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote