-
Active Member
Loose passenger pegs - why won't they stay up?
On my 2022 F3S my passenger pegs, particularly the left side, will not stay in the up position. I've tightened them both several times until the bolts won't move, and they still will not stay up. Not sure what else I can do to keep them in the folded position. It's annoying.
Last edited by Peter Aawen; 09-23-2023 at 01:01 PM.
Reason: Expanded title to briefly ask the question... ;-)
Retired U.S. Coast Guard 76-97
Shad bags
Lamonsters 2.0 usb dual power plate
F3 ultimate boards
LED arc lights
Lidlox helmet extender
Lamonsters top cuff with Ram ball and phone holder.
Lamonster billet sway bar end links
BRP driver backrest
LED Volt meter
BIW Cat Delete pipe
Route 129 windscreen
-
Very Active Member
Originally Posted by Dasmoetorhead
On my 2022 F3S my passenger pegs, particularly the left side, will not stay in the up position. I've tightened them both several times until the bolts won't move, and they still will not stay up. Not sure what else I can do to keep them in the folded position. It's annoying.
Are the bolts loosening or just won't tighten enough? If they are coming loose some BLUE Loctite may solve the issue. Otherwise buy some star washers or other type of lock washers and put them behind the pegs.
Last edited by Peter Aawen; 09-23-2023 at 01:02 PM.
Reason: Fixed quote display ;-)
-
Active Member
They loosen a little bit, but their still pretty tight. I might try some loctite.
Retired U.S. Coast Guard 76-97
Shad bags
Lamonsters 2.0 usb dual power plate
F3 ultimate boards
LED arc lights
Lidlox helmet extender
Lamonsters top cuff with Ram ball and phone holder.
Lamonster billet sway bar end links
BRP driver backrest
LED Volt meter
BIW Cat Delete pipe
Route 129 windscreen
-
Very Active Member
I don't know about the F-3 ..... but I had an 08 GS and an 11 RSS , the driver pegs had springs, the passenger pegs had spring loaded ball bearings, they would allow the pegs to be raised and held in the up position by the ball bearings. look at a FICHE' and see how yours are supposed to work ..... Mike
Last edited by BLUEKNIGHT911; 09-24-2023 at 02:23 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|