Originally Posted by
Snoking1127
Actual the fronts are pretty easy, I slide the strap in from the side, not back to front. The rear tire is a bit of a pain. I added side pieces of a nylon cutting board to the rear e-track for the tire to sit on. And the front lower shock bolts have ring nuts. The trike did 1550 mile trips to Wa and back for two seasons, so it was tied down with belts and suspenders.
.... When I came up with the " rachet strap over the tire " thing, I ran into he same issue ..... So I used a 2 ft. piece of 12 ga. " elec. house wire attached to the end of the strap .... this was much easier to feed over the tire and then pull the strap after it .....Mike
Reply With Quote
