'22 F3 Base - any ideas on Mounting racks for bags?

[Zune]

Hello peoples, in a dilemma here. I’m trying to mount a lamonster ips rack and the Shad 3p mount system. I have a 2022 f3 base. So I do not have the grab bars and do not want them as my bike is being kept for a solo rider. But I do want the luggage ability. The lamonster rack states for use with all f3 models but my bike has different plugs on the back. Leaving me with quite the gap. Any ideas on what I should do? Picture below to see what I’m talking about.
Thank you.


IMG_1436.jpg

[3Tyme]

Are you talking about the gap between the shad bracket and the frame or the gap around the ips mount and the stud? Its been awhile since I mounted the shad brackets, but I think I had to draw the brackets in tight with the bolt. If you want to talk about it let me know and i'll PM you my #

[Zune]

Are you talking about the gap between the shad bracket and the frame or the gap around the ips mount and the stud? Its been awhile since I mounted the shad brackets, but I think I had to draw the brackets in tight with the bolt. If you want to talk about it let me know and i'll PM you my #

So my F3 Base has these nubs and not the hand grab bars. The nubs don’t exactly fit the rack. I believe they will with the Shad mount but I’m trying to use both a rack and side saddle bags.

IMG_1437.jpg

[3Tyme]

pm sent

[MiCyclone]

I used Lamonster's bungee buttons in place of those rubber pieces. There was still some space, but they held the IPC rack in place.

[RickWB]

I have the Shad saddlebags on my 2019 F3 base, plus a rear rack.

.