-
Need a replacement Fog Light switch - anyone else? What did you get?
I have a 2013 RT Limited and my fog light switch has gone bad, and a replacement isn't available through BRP. Has anyone else experienced this and what was your solution?
Last edited by Peter Aawen; 06-22-2023 at 06:58 PM.
Reason: Expanded title to briefly ask the question/s... ;-)
-
Suggestion: Read the switch and Google any names or numbers you see. Somebody made that switch and it wasn't Can Am. Some electrical outfit that makes switches by the million.
Chip
2020 RTL
"Stella by Starlight"
UltraGard Full Cover, Front & Rear Cup Holders, Elka Stage 2 Rear Shock, TC & Dave Signal Button, Spyder Extras Sway Bar
-
Very Active Member
Originally Posted by mikext
I have a 2013 RT Limited and my fog light switch has gone bad and a replacement isn't available through BRP. Has anyone else experienced this and what was your solution?
First, are you checking the lights with the engine running?
Yeah. The switch was part of the optional Fog Light kit and not in the parts system as a separate spare part. However, it DOES have a part number.
710002351
There's a few out there. For example...
https://www.ebay.com/p/4023695320
Last edited by Snowbelt Spyder; 06-23-2023 at 05:48 AM.
Doug
2023 RT Limited, RT 622, BUDS/BUD2 Megatech/Megatronic
”Freedom is not a loophole”
F4 Customs SWCV, Ultimate, Lidlox, Adjustable Side Vents, Leather Like Grips, SS Grills, Centramatic, Garmin XT2, BajaRon Original Sway Bar w/ Lamonster links, P238
-
Very Active Member
Amazon has rocker switches for $9-
-
The fog light kit supplier may also sell the switch. Never hurts to call.
-
Very Active Member
I have been using these guys for years for multiple machines, boats, snowmobiles, ATV's, SxS and now Spyders.
https://www.otrattw.net/
Send them an email or call them, they will make you anything you want
-
Don't know about the older Spyders, but the switches on the newer ones (I have a '20) are made by Carling.
-
Very Active Member
I bought a Carling switch when I added driving lights on the 2013 RT I had. The light and symbol may not have been the same as the OEM, but why would one care about that on a 10 year old machine?
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Active Member
Make sure the switch is 44mm long not 37mm if you are installing it in the with the factory switches. most switches were wide enough (22mm) but were too short and not able to lock in the opening
2017 F3 LTD (SOLD)
2017 HD Freewheeler (SOLD)
2021 RT Base Upper and lower adjustable deflectors , Top case, Signature and lower lights, Baja Ron Bar, Back rest,Fobo TPMS, Garmin 396 , LED Fender lights, Rear LED turn and brake lights, Rear Brake light flasher, Rear Saddle bag LED lights, Battery tender, Lamonster Handle Bar Riser.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|