Results 1 to 25 of 25
  1. #1
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default Has anyone had any issues with the rear lid catching on the rear passenger back rest

    HI Everyone,

    Question:

    Has anyone had any issues with the rear lid catching on the rear passenger back rest on the trunk on a 2023 F3 LTD?


    I am attaching pictures:

    IMG_0163.jpg IMG_0157.jpg IMG_0158.jpg


    IMG_0160.jpg



    IMG_0161.jpg IMG_0162.jpg



    I insert a piece of plastic when open/and close the back lid.

    Also, When did they change the back lid on the F3 models?


    Does anyone have any suggestions/or solutions for the fix?

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  2. #2
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Does anyone have any suggestions about the rear lid catching on the rear passenger back rest?

    I have a 2023 F3 LTD Special.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  3. #3
    Very Active Member Isopedella's Avatar
    Join Date
    Feb 2022
    Location
    New Zealand
    Posts
    1,019
    Spyder Garage
    1

    Default

    I sorta guessing here. (read totally but chucking it out there)

    To remove that pad on some you remove the retaining screws, then lift the pad up.

    Maybe its not in position correctly.

    Perhaps removing, repacking the cover and refit the pad ensuring its all the way down may improve it.

    If the cover is a little loose. Well when I recover seats I stretch it and secure it with a staple gun on the underside of the seat.
    2017 F3 Ltd

  4. #4
    Active Member
    Join Date
    Oct 2020
    Location
    Vinton, IA
    Posts
    182
    Spyder Garage
    0

    Default

    Deanna, I was at my dealer this morning looking at a twin to your SE (BEAUTIFUL machine, btw); it has (nearly) the same issue, the standard F3 Limited next to it, did not. It appears (to me) that the problem might be in the way the seat-back is mounted to the topcase or the form that holds the back cushion is miscast. I would talk to your dealer and seek a remedy though them.
    Last edited by spyderdave; 06-10-2023 at 05:41 PM.

    2020 Spyder RT Limited; Deep Marsala/Chrome

    Formosa AZ01 165/50/R16's on PPA Recluse wheels up front
    General Altimax RT43 215/60/R15 on factory rear

    Primary exhaust: RLS Cat delete w/ his baffle; secondary, custom built w/ Flowmaster HS2
    Suspension: BajaRon swaybar (highly recommended!), M2 coil-overs, front & rear (also highly recomended!)
    Extra LED lighting and misc. to suit my needs/wants

  5. #5
    Very Active Member Jetfixer's Avatar
    Join Date
    Feb 2016
    Location
    Lake Wylie, South Carolina, USA
    Posts
    1,040
    Spyder Garage
    2

    Default

    I've seen this on multiple f3's. You're talking about the rubber flap, not the seat back cushion itself. The only fix I've found so far, is to put a little silicone lube on the flap where it rubs. It will last for quite a while.
    2020 RT Limited Deep Marsala Chrome

    2020 RT Limited , Marsala Red

  6. #6
    Active Member
    Join Date
    Oct 2020
    Location
    Vinton, IA
    Posts
    182
    Spyder Garage
    0

    Default

    Quote Originally Posted by Jetfixer View Post
    I've seen this on multiple f3's. You're talking about the rubber flap, not the seat back cushion itself. The only fix I've found so far, is to put a little silicone lube on the flap where it rubs. It will last for quite a while.
    At the risk of offending you..., OP should not have to use a piece of plastic to open or close her topcase lid; it is a defect in craftsmanship and a warranty issue.

    2020 Spyder RT Limited; Deep Marsala/Chrome

    Formosa AZ01 165/50/R16's on PPA Recluse wheels up front
    General Altimax RT43 215/60/R15 on factory rear

    Primary exhaust: RLS Cat delete w/ his baffle; secondary, custom built w/ Flowmaster HS2
    Suspension: BajaRon swaybar (highly recommended!), M2 coil-overs, front & rear (also highly recomended!)
    Extra LED lighting and misc. to suit my needs/wants

  7. #7
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Isopedella View Post
    I sorta guessing here. (read totally but chucking it out there)

    To remove that pad on some you remove the retaining screws, then lift the pad up.

    Maybe its not in position correctly.

    Perhaps removing, repacking the cover and refit the pad ensuring its all the way down may improve it.

    If the cover is a little loose. Well when I recover seats I stretch it and secure it with a staple gun on the underside of the seat.
    Isopedella,


    The pad is in-place. The pad has as a slight bump( Manufacturer defect on it) which I posted a picture of.

    The back of the passenger seat is fine.

    The cover is not loose.

    Are the retaining screws on the side of the lid?

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  8. #8
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by spyderdave View Post
    Deanna, I was at my dealer this morning looking at a twin to your SE (BEAUTIFUL machine, btw); it has (nearly) the same issue, the standard F3 Limited next to it, did not. It appears (to me) that the problem might be in the way the seat-back is mounted to the topcase or the form that holds the back cushion is miscast. I would talk to your dealer and seek a remedy though them.
    Spyderdave,

    I think that the "form that holds the back cushion is miscast. I'll go the can am dealership and show them and ask them for a remedy. I'll do that this week. I'll post on this thread to see what I the dealership says.

    I'll let you know.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  9. #9
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Jetfixer View Post
    I've seen this on multiple f3's. You're talking about the rubber flap, not the seat back cushion itself. The only fix I've found so far, is to put a little silicone lube on the flap where it rubs. It will last for quite a while.
    Jetfixer,

    Yes, I am talking about the rubber flap behind the back cushion. This week I am going to the dealership to see if I can get a remedy from them.

    Thanks for the suggestion.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  10. #10
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by spyderdave View Post
    At the risk of offending you..., OP should not have to use a piece of plastic to open or close her topcase lid; it is a defect in craftsmanship and a warranty issue.
    spyderdave,

    I agree with you about the "defect in the craftsmanship and a warranty issue.

    Also, No, I should have to use a piece of plastic to open and close the topcase lid.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  11. #11
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Jetfixer View Post
    I've seen this on multiple f3's. You're talking about the rubber flap, not the seat back cushion itself. The only fix I've found so far, is to put a little silicone lube on the flap where it rubs. It will last for quite a while.
    Jetfixer,

    Look at picture # 3 in my first post, it shows the OEM defect in the rubber flap, and the indents of where the 2 screws are.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  12. #12
    Very Active Member Isopedella's Avatar
    Join Date
    Feb 2022
    Location
    New Zealand
    Posts
    1,019
    Spyder Garage
    1

    Default

    Quote Originally Posted by Deanna777 View Post
    Isopedella,


    The pad is in-place. The pad has as a slight bump( Manufacturer defect on it) which I posted a picture of.

    The back of the passenger seat is fine.

    The cover is not loose.

    Are the retaining screws on the side of the lid?

    Deanna
    I dont know for sure but on my 2017 Ltd there are 2 screws on the front wall of the trunk.
    I have not done it but suspect if you remove the screws it may come off like in this video.
    Do Not push on the screws apparently.

    Mine looks like this. The top of the drink bottle is pointing to the RH screw looking forward.

    pillion backrest 12_135810.jpg

    Thinking it may be similar to this.

    www.dailymotion.com/video/x31y6ax

    Late edit.

    Yours is brand new isn't it? Dealer fix?
    Last edited by Isopedella; 06-11-2023 at 11:19 PM.
    2017 F3 Ltd

  13. #13
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Isopedella View Post
    I dont know for sure but on my 2017 Ltd there are 2 screws on the front wall of the trunk.
    I have not done it but suspect if you remove the screws it may come off like in this video.
    Do Not push on the screws apparently.

    Mine looks like this. The top of the drink bottle is pointing to the RH screw looking forward.

    pillion backrest 12_135810.jpg

    Thinking it may be similar to this.

    www.dailymotion.com/video/x31y6ax

    Late edit.

    Yours is brand new isn't it? Dealer fix?
    Isopedella,

    Yes, My spyder is brand new. I'll check with the dealership this week and see what they say. I hope they open up a case with BRP. The dealership should run it thru the warranty. It is a OEM manufacturer defect.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  14. #14
    Very Active Member Mikey's Avatar
    Join Date
    Sep 2017
    Location
    Durham,Maine
    Posts
    3,593
    Spyder Garage
    1

    Default

    Good luck and don't let them pull the wool over you, because it's NOT right!
    2012 RTL , Pearl

  15. #15
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Mikey View Post
    Good luck and don't let them pull the wool over you, because it's NOT right!
    Mikey,

    Thanks! Oh I wont let them do that! I'll stand my own ground!

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  16. #16
    Very Active Member Jetfixer's Avatar
    Join Date
    Feb 2016
    Location
    Lake Wylie, South Carolina, USA
    Posts
    1,040
    Spyder Garage
    2

    Default

    Quote Originally Posted by spyderdave View Post
    At the risk of offending you..., OP should not have to use a piece of plastic to open or close her topcase lid; it is a defect in craftsmanship and a warranty issue.
    No offense taken! I agree completely, but I'm not sure there IS a fix from Can Am.

    Deanna, try removing the pax backrest. Then see if you can reposition the rubber flap to sit more forward, which will give you more room. If I remember correctly, I was able to trim the rubber with an xacto knife so that it sat further forward at the screw slots. The dab of silicone still helps.
    2020 RT Limited Deep Marsala Chrome

    2020 RT Limited , Marsala Red

  17. #17
    Very Active Member Isopedella's Avatar
    Join Date
    Feb 2022
    Location
    New Zealand
    Posts
    1,019
    Spyder Garage
    1

    Default

    I wouldn't mess with at all. Its brand new. Worst case is something gets damaged. Take to the dealer and let them sort it I reckon.
    .
    2017 F3 Ltd

  18. #18
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Jetfixer View Post
    No offense taken! I agree completely, but I'm not sure there IS a fix from Can Am.

    Deanna, try removing the pax backrest. Then see if you can reposition the rubber flap to sit more forward, which will give you more room. If I remember correctly, I was able to trim the rubber with an xacto knife so that it sat further forward at the screw slots. The dab of silicone still helps.
    Jetfixer,

    Look at picture # 4 on the 1st post.
    IMG_0171.jpg IMG_0170.jpg IMG_0169.jpg



    Behind the backrest are 2 holders/hooks for the backrest( which are built-in) to hold the backrest to the bike. I can't move the backrest forward because of the 2 holders/hooks. If I could I would.

    It is a very poor design behind the backrest, rubber flap, and the lid.

    The above pictures are a temporary fix until I get to the dealership.


    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  19. #19
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Isopedella View Post
    I wouldn't mess with at all. Its brand new. Worst case is something gets damaged. Take to the dealer and let them sort it I reckon.
    .
    Isopedella,


    I will not mess with it. I'll take it to the dealership and let them handle it.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  20. #20
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    HI All,

    I appecate the suggestions and comments on trying to get a solution.


    I am going to take the bike to the dealership and let them take care of it.

    The bike is brand new. I am going to use the warranty on it.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  21. #21
    Active Member
    Join Date
    Feb 2020
    Location
    illinois
    Posts
    212
    Spyder Garage
    0

    Default

    My 2022 F3L Limited makes slight contact when opening lid in same spot but a little lube to the dry rubber handles it.

  22. #22
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by Isopedella View Post
    I wouldn't mess with at all. Its brand new. Worst case is something gets damaged. Take to the dealer and let them sort it I reckon.
    .
    Isopedella,

    I wont mess with it. Yes, It is brand new. I did take to the dealership, and they said "it is the first time they had heard of it. I sent pictures to one of the sales guys via email, I am waiting to hear back via email. I also have an appointment next week at the dealership.

    i'll let everyone know next week when I find out. Stay tuned!



    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  23. #23
    Active Member
    Join Date
    Feb 2020
    Location
    illinois
    Posts
    212
    Spyder Garage
    0

    Default

    I am like jetfixer in that a little rubber lube took care of my issue with the rub and it now works like no interference at all. If I can improvise and save a trip to a dealership, then so be it.
    Last edited by Peter Aawen; 06-21-2023 at 08:43 AM. Reason: jerfixer... & Caps ;-)

  24. #24
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default

    Quote Originally Posted by baxter View Post
    I am like jetfixer in that a little rubber lube took care of my issue with the rub and it now works like no interference at all. If I can improvise and save a trip to a dealership, then so be it.
    baxter,

    Thanks for the info. My bike is brand new I am not going to mess with it.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

  25. #25
    Very Active Member Deanna777's Avatar
    Join Date
    Oct 2012
    Location
    Vermont
    Posts
    7,986
    Spyder Garage
    1

    Default Update 6/28/2023 @ 3:19

    I took my spyder to the dealership today and they said to keep an eye on it.

    If the rubber flap gets bad they can order a new rubber flap.

    Deanna




    Current Spyder - 2023 F3 LTD Special Mineral Blue

    Red LED NANO Saddlebag Marker Lights with Full Illumination
    Sequential Fender LED'S (Amber/Red) with Safety Reflector
    Dual Power Plate (12 V & USB ports)
    Gremlin Bell
    Rear Trunk Organizer (4 holders, 2 Elastic Holders)
    Lamonster "Top Cuff" with adjustable drink Holder
    SpyderPops Missing Guard Belt
    Console Accent Trim (Carbon Fiber Domed Black)
    Ultimate F3 Floorboards
    Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
    Sway Bar with Links
    Rolo Laser Alignment
    Half Cover


    Former Spyder - 2014 RTS SE6 Cognac SOLD
    2023 F3 LTD Special Series , N/A N/A Mineral Blue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •