|
-
Very Active Member
 Has anyone adapted these Cargo Nets to the '20-Up?
https://www.allterraindepot.com/prod...net-set-41-156
Looking at my '22 lids, there are places in the corners where a screw can be put in to hold the clips.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
Very Active Member
I have a set of them and that was the plan but after receiving them and looking at everything I just decided to leave it as is.
-
Very Active Member
I thought they came with the bike? Wow love mine they work well.
-
Very Active Member
 Originally Posted by Mikey
I thought they came with the bike? Wow love mine they work well.
They are not intended to be used with the 2020 and up models, only the 2019 and below.
-
Very Active Member
I have these on my '20 RT. I mounted them on the inside edges of the panniers, not on the door. It keeps the crap I have in the box from falling out when I open the box.
I used self-tapping screws to mount the tabs.
PXL_20230605_182225709.jpg
Last edited by RayBJ; 06-05-2023 at 01:32 PM.
'20 Spyder RT: Bajaron swaybar. Vredestein tires, Pedal Commander, Elka front shocks, GPS/USB/12V handlebar mount, Heli-Bars, Radar Detector, KOTT grills & vents, Shad top case, chin & DRL LEDs.
 
-
Very Active Member
Originally Posted by RayBJ
I have these on my '20 RT. I mounted them on the inside edges of the panniers, not on the door. It keeps the crap I have in the box from falling out when I open the box.
I used self-tapping screws to mount the tabs.
PXL_20230605_182225709.jpg
Good Idea. I think I will order a set for the side bags and if I can't make them work, not much lost.
K80.....how much, mailed to N.C? I do Paypal.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
Active Member
wondering how mounting the trunk net to the screws for the rack would work?
MWO (Ret'd) SJ Barnes
‘20 RTL Stone Grey
named Britannia in honour of EE Doc Smith’s
Grey Lensman’s ship.
Farkles:
Bestem Carplay
canamsypderaccessories hitch and wiring harness,
showchrome trunk rack,
12v AND dual USB direct to battery in the frunk,
dual USB switched in the blank console switch spot (parasites the power off the seat heater switch),
frunk lid organizer,
trunk organizer,
showchrome rider backrest,
ryder and passenger cup holders,
ram mount for the iPad mini I use for GPS
quadlock phone mount
Nautilus horn
Data blocker on the glove box USB
Big Bike Parts highway pegs
Spyderzone dash pouch
Convex mirrors
‘20 Ryker 900 (my wife’s ryde)
Farkles
Slingmods fwd/rev ‘suicide shifter’
frunk organizer
dual horn
Max mount
Rear seat with tall back rest (not mounted)
Ryder backrest (not mounted)
Side bag
Top bag
top bag makes a good backrest. Will swap on the rear seat if she ever wants to 2up
-
Very Active Member
Originally Posted by Stache
wondering how mounting the trunk net to the screws for the rack would work?
I don't think I'd want one on the Frunk anyway. I have my Owners manual that came in a sturdy plastic case velcroed on the lid with my ins and registration inside.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
Very Active Member
Originally Posted by ulflyer
Good Idea. I think I will order a set for the side bags and if I can't make them work, not much lost.
K80.....how much, mailed to N.C? I do Paypal.
I have a friend with a 2015 and, I have told him that he can have them.
-
Very Active Member
Originally Posted by K80Shooter
I have a friend with a 2015 and, I have told him that he can have them.
Appreciate the feedback.
Two Wheelers from 1963-2011
Three Wheelers:
2011 RT(Red)
2014 RT(white)
2016 F3T(red)
2022 RT current ride(silver)
__________________
2016 Slingshot
2018 Vanderhall
2019 Slingshot
-
Don't need them. I purchased the Spyderpops bag liners below, and it fills that area perfectly.
https://spyderpops.com/spyderbags-cu...els-all-years/
-
Originally Posted by BigLenny
+1 on these bags. They keep thing where you want them, easy to keep stuff organized
RiderDuke
My Ride
2021 Glacial Blue Metallic F3-T
-
Active Member
Did the same as #5 post, only used plastic pop rivets. Keeps things from rolling out.
Adj removable backrest, KOTT radiator screens
Double horn (118db), Lamonster mirror fix
tender plug in, luggage liner/bags, FOBO 2
Drinks2go cup holder, replaced the seat strut
Garmin DriveSmart 71 GPS, Garmin BC 30 backup camera.
White pulley, Pedal Commander
Laminar Lip- looks fonky but works.
J&M 2003 CB installed
Home made belt guard
7x12 enclosed trailer
2021 RTL Dark Chalk Metallic
Skip H.
-
I adapted older style nets on my 2020. To the four (4) existing screws I added two (2) #6 3/8" screws at the lower lid. To all screws I added black nylon fold-over wire guides at each screw for a total of six (6) attachment locations. To connect the nets to the wire guides, I used black electrical ties drawn fairly tight. Then I cut off the excess.
NOTE: be very careful drilling the holes for the screws to not go too far.
Last edited by Peter Aawen; 10-03-2023 at 06:39 PM.
Reason: he/the; ' 's ... ;-)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
