-
Anyone know where to get a 2020+ RT trunk lid latching pad?
Looking to see if anyone has a good idea where to get a pad that will stick to the truck on 20+ RTs. I have to slam the lid down to get it to latch and I don't want to scratch the surface, so I was thinking of a pad that stuck to the lid but is slick on top and UV resistant. Any ideas out there? Thanks
Last edited by Peter Aawen; 06-02-2023 at 02:26 AM.
Reason: Expanded title to briefly ask the question... ;-)
-
Active Member
I don’t recommend slamming the lid. I close mine gently and then firmly push down the rear edge so the latch engages.
2021 Spyder RT Limited Asphalt Gray Chrome Edition
2022 Spyder RT Limited Hyper Silver Chrome Edition
Spyderco Paramilitary 2
Vanquest Gen 2 7x10 First Aid Trauma Pack
Garage Door Opener
iPass
DJI Action 2
Tackform Anti-Vibe Phone Cradle
UltraGard Full Covers
Show Chrome rear trunk lid lift strut
Noco Genius 1
Noco GBX Booster X
Show Chrome Platinum Grande Adjustable Padded Driver Backrest with Storage Pouch
Baseus Cordless Inflator
-
Very Active Member
Originally Posted by Woodenfish
I don’t recommend slamming the lid. I close mine gently and then firmly push down the rear edge so the latch engages.
I do the same as Woodenfish … works well for me.
Love my Spyders
2016 F3L Steel Black purchased 7/16/2016 Sold 3/11/2023 (22,500 mi)
2014 RTS Circuit Yellow purchased 3/2/2018
2020 RTL Petrol Blue purchased 1/27/2023
Girls on Spyders #3195
No more 2 wheels
2020 RTL , Lamonster floor board riser Petrol Blue
-
Very Active Member
I hold the release button in when closing and give a frim push to make sure it's locked, SLAMING ''doors/lids/cover's'' is bad
-
Make sure the pins are aligned correctly, if not, adjust them. That latch base is plastic, slamming the lid will evenually break it.
2020 Spyder RT Limited; Deep Marsala/Chrome
Formosa AZ01 165/50/R16's on PPA Recluse wheels up front
General Altimax RT43 215/60/R15 on factory rear
Primary exhaust: RLS Cat delete w/ his baffle; secondary, custom built w/ Flowmaster HS2
Suspension: BajaRon swaybar (highly recommended!), M2 coil-overs, front & rear (also highly recomended!)
Extra LED lighting and misc. to suit my needs/wants
-
Very Active Member
Originally Posted by spyderdave
Make sure the pins are aligned correctly, if not, adjust them. That latch base is plastic, slamming the lid will evenually break it.
Yes. I think the best advice would be to adjust the locking mechanism so you don't need to slam the lid.
It's pretty easy to do.
Here's a video that should help:
https://youtu.be/MVq0_JgBZXU?t=186
As always, my free advice comes with a double your money back guarantee.
If it ain't broke, don't break it.
IBA #47122
2020 RT Limited Asphalt Grey
-
Very Active Member
Baloo is my name. Spyders are my game. Well, it's a doo-bah-dee-doo, yes, it's a doo-bah-dee-doo, I mean a doo-bee, doo-bee, doo-bee, doo-bee, doo-bee-dee-doo. And, well, now. Ha ha! What have we here?
2020 Petrol Blue Metallic RTL
-
Well I misspoke by using the word slam. I close the lid and then give the top a wack with the palm of my hand. I’ll try pushing in the button but I still have to push down on the lid. I was thinking over time it will probably damage the finish with road grit. So I was looking for a pad to protect the finish. Thanks for all your advice.
-
Very Active Member
Maybe get something like this and cut it to the size that you want. This one is 6" wide but they have others.
https://www.amazon.com/VViViD-Clear-...NsaWNrPXRydWU=
-
Very Active Member
-
Originally Posted by K80Shooter
Thanks for your help. That should work great.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|