Can you Help identify these connectors?

[bsavulis]

2014 RT limited SE6. No CB, no satellite radio.
On the side of my fuel tank I have a micro USB and a mini phone plug that are capped off. Can anyone tell me what these are connected to, the cable is part of the oem harness and leads towards the front. I could not find any reference on the schematic.

Thanks
Brian

[bsavulis]

Well I think I found them on the schematic, usb, and mic in on the Gps. NOT sure what they would be used for but at least I think they are identified.
How about the connector shown in this picture. It is under the passenger seat on the left side

20230517_145632.jpg

[USAF]

Well I think I found them on the schematic, usb, and mic in on the Gps. NOT sure what they would be used for but at least I think they are identified.
How about the connector shown in this picture. It is under the passenger seat on the left side

20230517_145632.jpg

Heated seat possibly ?

[UtahPete]

2014 RT limited SE6. No CB, no satellite radio.
On the side of my fuel tank I have a micro USB and a mini phone plug that are capped off. Can anyone tell me what these are connected to, the cable is part of the oem harness and leads towards the front. I could not find any reference on the schematic.

Thanks
Brian

Possibly a CB connection. Doesn't look like USB to me.

[BertRemington]

3-pin Deutsch connector. What are the wire colors?

[Peter Aawen]

2014 RT limited SE6. No CB, no satellite radio.
On the side of my fuel tank I have a micro USB and a mini phone plug that are capped off. Can anyone tell me what these are connected to, the cable is part of the oem harness and leads towards the front. I could not find any reference on the schematic.

Thanks
Brian

That looks a lot like the GPS connector that Spyder Ltd's of that vintage had...

[bsavulis]

Bert,
The wire colors are Purple Black Orange.
Thanks for the help!

[Flamewinger]

Sounds like they’re for a CB as that is the only thing that requires a mike. BRP did have a factory CB for the earlier models.

[BertRemington]

bsa -- best fit is pillion rider switch (detects presence of passenger which VCM uses to adjust safety parameters). Wire colors

Blk/Blu
Org/Pnk
Vio/Brn