-
Anyone know who makes the OEM CB Antenna?
Anyone know who makes the OEM Factory RT CB Antenna? I need to replace one and BRB used m6 threads and most Antennas are 3/8. Would be nice to contact the supplier/manufacturer to get a replacement. I also thought about drilling the "Block" and taping it to a 3/8 x24 but thought I would look here first.
Thanks
Last edited by Peter Aawen; 05-08-2023 at 01:02 PM.
Reason: Expanded title to briefly ask the question... ;-)
Thank you,
Tommy
2017 Grey RT Limited
-
Very Active Member
Sorry, I’ e had my ‘14 RTS now for 8 years now, and this is the FIRST post that I’ve seen that refers to an OEM CB antenna. I didn’t realize that there was such a beast. I just assumed that they were aftermarket. In any event, to answer you post, I do not know. The last m/c CB that I had was on my ‘93 Gold Wing.
Tri-Axis Chrome Handlebars
Sena SM10 BT Dongle
Double USB Port/Volt meter
LaMonster Magic Mirrors
BajaRon Swaybar
HALO Skid Plate
Spyder Pops Rear Running Lights Turn Signals/Brake Light
Spyder Pops Mirror Running Lights/Turn Signals
Shorty Antenna
LaMonster Cat Delete
Akrapovic Muffler
FOBO2 TPMS
Rear Trunk Rack
Bruce Erickson
Chilliwack, BC
Canada
You know when a politician is Lying. It's when his lips are moving!
2014 RTS-SE6 - Cognac
intro to m/c 1949 Royal Enfield 500cc thumper
-
Very Active Member
Originally Posted by Tommy
Anyone know who makes the OEM Factory RT CB Antenna? I need to replace one and BRB used m6 threads and most Antennas are 3/8. Would be nice to contact the supplier/manufacturer to get a replacement. I also thought about drilling the "Block" and taping it to a 3/8 x24 but thought I would look here first.
Thanks
Well the OEM speakers in my 14 RT were made by " RSI ", I think the radio also .... the CB might have been too .... JMHO .... Mike
-
-
Originally Posted by Flamewinger
I think John is getting out of the Spyder options as he has just BRP BT devices. Also he had an antenna option but that was a few years back. I think I will just drill and tap the block for a standard 3/8 antenna.
Thank you,
Tommy
2017 Grey RT Limited
-
Thanks Mike...
its looking like I will just drill and tap the block for a standard 3/8 antenna. This gives me many options..
Thank you,
Tommy
2017 Grey RT Limited
-
Very Active Member
Originally Posted by Tommy
Thanks Mike...
its looking like I will just drill and tap the block for a standard 3/8 antenna. This gives me many options..
That's what I did. I used a Firestik brand no ground plane antenna. Only challenge was tucking 17' of coax under the plastic below the passenger seat.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|