Your Spyder probably uses DOT 4 brake fluid with a maintenance schedule of every 2 years……Dot 4 has a tendency to absorb more moisture from the atmosphere than Dot 3 fluid, BUT….. Dot 4 has a higher boiling point with less seal swell than Dot 3.
My Spyder only has 11k on it and I found the fluid very dark instead of the amber color of new fluid……… just saying…….. probably good not to overlook the required maintenance.
Last edited by Peter Aawen; 03-29-2023 at 09:07 PM.
Reason: ' 's ;-)
If you haven’t performed this maintenance yet, would recommend getting speed bleeders. Makes the job super easy. Buy the bag and hose from them also. Took me 45 minutes and didn’t spill a drop of fluid.
If you haven’t performed this maintenance yet, would recommend getting speed bleeders. Makes the job super easy. Buy the bag and hose from them also. Took me 45 minutes and didn’t spill a drop of fluid.
Where are you getting speed bleeder from and what info do you need to order them I have a couple of projects I can use them on besides my spyder and has any body had problems with them like leaking?? Thanks
Where are you getting speed bleeder from and what info do you need to order them I have a couple of projects I can use them on besides my spyder and has any body had problems with them like leaking?? Thanks
Thanks for this ..... Do you think these cannot be used on a car / trk ???????....... Why only Mtc's ...... Mike
Mike, click back on their home page and you will find their charts for different type vehicles. Love mine. They will become a standard addon for anything in the future.
My 4 wheelers require DOT 3 and the spyder DOT 4 so I use this.
Your 4-wheelers might "require" DOT3, but DOT4 will work in them just as well (or better).
Originally Posted by Jane1330
Our shop has an abundance of DOT 5.1 (NOT 5) so that's what I use...
It is good that you know the difference that ".1" makes. DOT5 fluid is silicone-based and is not compatible with DOT3 or DOT4. I think there might be issues with seals, too, you need to ensure that the entire system will work with DOT5. For some reason, they came out with a DOT5.1 that is compatible with DOT3 and DOT4, but has improvements. The (unfortunately) similar name can be rather confusing.
Mike, click back on their home page and you will find their charts for different type vehicles. Love mine. They will become a standard addon for anything in the future.
OK , thanks for that .....I'll check if the Spyder models have the same numbers for my Nissan Versa >... Mike
Where are you getting speed bleeder from and what info do you need to order them I have a couple of projects I can use them on besides my spyder and has any body had problems with them like leaking?? Thanks
AMAZON.com is where I got mine. Check the chart for right ones!
2014 RTL bought in 3/20 with only 6,000 mi.
Came with Garmin 660
Car tires in 5/20; Elka stage 2 front shocks in 10/21