Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Mar 2023
    Location
    Mississippi
    Posts
    4
    Spyder Garage
    0

    Default Will a 2021 Sea to Sky fit in a 6x10 utility trailer?

    Will a 2021 sea to sky fit on a 6x 10 utility trailer?
    Last edited by Peter Aawen; 03-20-2023 at 10:35 PM. Reason: Expanded title to briefly ask the question... ;-)

  2. #2
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,345
    Spyder Garage
    1

    Default

    Barely but yes.

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  3. #3
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,375
    Spyder Garage
    0

    Default

    Quote Originally Posted by Bamaboy View Post
    Will a 2021 sea to sky fit on a 6x 10 utility trailer?
    6 ft X 10 ft. is fine ....... The important measurement is the Width of the trailer opening .... good luck .... Mike

  4. #4
    Member narygancy's Avatar
    Join Date
    Jul 2022
    Location
    Pennsylvania
    Posts
    25
    Spyder Garage
    1

    Default

    And don't forget, the stated width of the trailer often doesn't factor in the wheel wells creating a bottleneck in the middle of the trailer. You may be able to back onto the trailer but then most of your weight will be on the back of the trailer and not on the tongue.
    2016 S6E , Red

  5. #5
    Very Active Member
    Join Date
    Mar 2008
    Location
    Hesston, PA
    Posts
    1,038
    Spyder Garage
    0

    Default

    Also make sure the trailer loading ramps are long enough so the front end of the Spyder doesn't catch when loading...larryd

  6. #6
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    9,627
    Spyder Garage
    0

    Default

    Quote Originally Posted by larryd View Post
    Also make sure the trailer loading ramps are long enough so the front end of the Spyder doesn't catch when loading...larryd
    And don't forget that you'll need the belly of the Spyder to clear the angle of the ramp to trailer bed!

    Hit that & drag over it & you'll stand a good chance of bending/breaking the bracket holding the Reverse Gear Actuator, and once that's out of alignment it'll really ruin your day - well, mess it up at least until you either bend it back into alignment &/or replace it anyway!
    2013 RT Ltd Pearl White

    Ryde More, Worry Less!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •