Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Jul 2022
    Location
    North Carolina
    Posts
    2
    Spyder Garage
    0

    Default Anyone tried Ryker bar-end Mirrors on an RT?

    Has anyone ever attached Ryker mirrors on the ends of the handlebars on an RT?
    Last edited by Peter Aawen; 03-20-2023 at 03:44 PM. Reason: Removed Prefix - not 1330 engine specific & expanded title to briefly ask the question... ;-)

  2. #2
    Very Active Member BLUEKNIGHT911's Avatar
    Join Date
    Aug 2011
    Location
    Central VERMONT
    Posts
    20,271
    Spyder Garage
    0

    Default

    Quote Originally Posted by LtCol View Post
    Has anyone ever attached Ryker mirrors on the ends of the handlebars on an RT?
    I have seen " handle-bar end " mirrors, which they make for snow-mobiles ..... good luck .... Mike
    Last edited by BLUEKNIGHT911; 03-25-2023 at 01:26 PM.

  3. #3
    Very Active Member CopperSpyder's Avatar
    Join Date
    Nov 2018
    Location
    Waynesboro, PA
    Posts
    3,179
    Spyder Garage
    1

    Default

    Not sure what year Spyder you are talking about, but the 2020 and up has a new type alternative mirrors that seem to be showing up alot. https://www.lamonstergarage.com/can-...g-eye-mirrors/
    My Spyder
    2012 RTL , Brown

  4. #4
    Active Member
    Join Date
    Apr 2022
    Location
    Oklahoma
    Posts
    32
    Spyder Garage
    0

    Default

    I have the big eye mirrors on my '21 RTL. Just seems natural for mirrors to be there.

  5. #5
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,329
    Spyder Garage
    1

    Default

    I rode a Ryker Friday for the 1st time and wondered the same thing.

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  6. #6
    Very Active Member troop's Avatar
    Join Date
    Aug 2019
    Location
    Stoughton, WI
    Posts
    2,524
    Spyder Garage
    2

    Default

    These two styles will work on the end of your handlebars. You'll just need a longer M6 screws and not use the supplied plug ends. I used a rubber washer between the mirror and bar end to prevent any possible scratching.


    https://www.ebay.com/itm/35420153511...Bk9SR9Lf7cTgYQ

    https://www.ebay.com/itm/39422044329...Bk9SR9bz-cTgYQ


    2022 RT Sea To Sky
    --------------------------------
    2022 RT Seat To Sky , Mystery Blue

  7. #7
    Member narygancy's Avatar
    Join Date
    Jul 2022
    Location
    Pennsylvania
    Posts
    25
    Spyder Garage
    1

    Default

    My Can Am dealer said they wouldn't work on my F3 so I never pursued the subject.

    Last year I took advice from another forum thread and purchased some after-market end-bar mirrors from Amazon ($18). There are others out there, so I suggest you check around. I did have to get a longer bolt for them to attach to my bars. I like them a lot and use them as my primary mirrors, especially when riding 2-up. On occasion I do bump into them and have to reset, but I haven't found that to be a big deal.

    KATUR Motorcycle Rear View Mirror - Note: I removed the silver "collars" and mounted the mirrors directly to the end of my bars. They look good and were an easy install.

    https://www.amazon.com/dp/B01FM3CDAO...t_b_asin_title

    2022 (3).jpg
    Last edited by Peter Aawen; 03-21-2023 at 05:14 PM. Reason: Fixed Link ;-)
    2016 S6E , Red

  8. #8
    Active Member budvoss's Avatar
    Join Date
    Dec 2010
    Location
    S.C.
    Posts
    54
    Spyder Garage
    0

    Default

    Quote Originally Posted by narygancy View Post
    My Can Am dealer said they wouldn't work on my F3 so I never pursued the subject.

    Last year I took advice from another forum thread and purchased some after-market end-bar mirrors from Amazon ($18). There are others out there, so I suggest you check around. I did have to get a longer bolt for them to attach to my bars. I like them a lot and use them as my primary mirrors, especially when riding 2-up. On occasion I do bump into them and have to reset, but I haven't found that to be a big deal.

    KATUR Motorcycle Rear View Mirror - Note: I removed the silver "collars" and mounted the mirrors directly to the end of my bars. They look good and were an easy install.

    https://www.amazon.com/dp/B01FM3CDAO...t_b_asin_title

    2022 (3).jpg
    They look great. I just ordered a pair..
    2022 RT Limited

  9. #9
    Very Active Member pegasus1300's Avatar
    Join Date
    Feb 2012
    Location
    Spring City,Utah
    Posts
    5,329
    Spyder Garage
    1

    Default

    Thanks guys, that is great information.

    Happy TRAils/NSD
    Paul

    2012 RT L
    AMA 25 years Life Member
    TRA
    PGR
    Rhino Riders Plate #83
    Venturers #78
    TOI

    2012 Spyder RT L , Baja Ron Plugs and wires Lava Bronze

  10. #10
    Active Member seaweed's Avatar
    Join Date
    Oct 2015
    Location
    Fort Lupton, Colorado
    Posts
    350
    Spyder Garage
    0

    Dean Secord AKA seaweed
    Veteran: U.S. Air Force
    2015 RT-S SE6

    My Mods:
    TricLed Turn Signal, Squared Away Sept, 2016
    SpyderPops Bump Skid, SpyderPops Missing Rock Guard, ION camera
    Show Chrome Back Rest , Show Chrome Hitch
    Leesure-lite trailer, Harbor Freight tag along trailer (sold)
    Hopnel 850 Saddlebag Liners, Hopnel 3 piece lid netset - trunk and saddlebags
    Magic Brake Strobe/Flasher, DIY LED light strips on upper and lower A frames
    BlueKnight911 Magic Mirrors, DIY superior grill, USB port, Hwy pegs,
    DIY Flag mounts for USA and US Air Force flags, Method to open Frunk and seat without using key,
    LED headlights and LED fog lights, turn signal switch safety mod

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •