-
After F3T Floorboards that won't break the bank?
Hi Everyone.
I am a new member, I just bought a 2022 Spyder F3T
I need floorboards but they are way too costly.
Does anyone know where I can get a set without digging into
my grandchildren's college fund? Used floorboards will be ok.
My budget is $2-350. Thanks Everyone
Fromridgewood
Last edited by Peter Aawen; 03-11-2023 at 08:34 PM.
Reason: Expanded title to briefly ask the question... ;-)
-
They are a bit over your budget at 369 but the lamonster black diamond floorboards are nice… i have a set on my ryker and have been pleased
-
Very Active Member
I have a pair of OEM footboards. Only used for 1070 miles before I switched to Ultimate boards
IMG_0168.jpg IMG_0169.jpg.
$50 + shipping. All you need is the mounting bolts.
PM me for details
Last edited by Peter Aawen; 03-31-2023 at 12:39 AM.
Reason: Fixed attach display ;-)
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Active Member
Originally Posted by Haze
I have a pair of OEM footboards. Only used for 1070 miles before I switched to Ultimate boards
IMG_0168.jpg IMG_0169.jpg.
$50 + shipping. All you need is the mounting bolts.
PM me for details
Sounds like a heck of a deal! Hopefully to OP will respond.
Last edited by Peter Aawen; 03-31-2023 at 12:39 AM.
Reason: Fixed quote display ;-)
-
Very Active Member
Originally Posted by Haze
I have a pair of OEM footboards. Only used for 1070 miles before I switched to Ultimate boards
IMG_0168.jpg IMG_0169.jpg.
$50 + shipping. All you need is the mounting bolts.
PM me for details
Haze, I’m not saying this as a deal breaker as that’s a great price for boards, but aren’t the clamps for the pegs different to the clamps for the boards on the F3? I have a recollection that there was a difference, but I could be completely wrong. I just don’t want to see you or the OP disappointed.
Pete
Last edited by Peter Aawen; 03-31-2023 at 12:39 AM.
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
Very Active Member
Originally Posted by Peteoz
Haze, I’m not saying this as a deal breaker as that’s a great price for boards, but aren’t the clamps for the pegs different to the clamps for the boards on the F3? I have a recollection that there was a difference, but I could be completely wrong. I just don’t want to see you or the OP disappointed.
Pete
Those are nice boards. But it is not a direct replacement as shown for the stock peg locations. I picked up a piece of 1/4" aluminum and made my own. Cut them out to be a fit and bolted them directly to where the rubber was on the pegs. After fitting them I coated them with rubber bed liner material. Worked great until I came across a set if OEM floorboards.
2021 RTL , brake pedal from "Web Boards" chalk white
-
Member
I agree with Peteoz, I'm pretty sure there's a difference in the mounts for boards and pegs, make sure whatever you buy will fit your F3. BTW, that's a very good price for boards Haze.
I bit the bullet and went with the Ultimate Floorboards and am very happy with them.
-
Very Active Member
Thank you to everyone for the words of caution for the purchaser.
I'm including the caution in my reply to potential buyers.
David C
2016 F3T
DIY Garage Door Opener & GPS Mount
Battery tender cable
Rear IPS Pack Rack
-
Thank you Everyone for your guidance on my floorboard inquiry. I'm not sure that I will be able to mount the used pair shown by Haze, so unless something else pops up I will probably bite the bullet also and go with Lamonster or Ultimate.
Regards and thanks for the fast response.
Fromridgewood
Last edited by Peter Aawen; 03-31-2023 at 12:42 AM.
Reason: Removed excess of spaces & cr's! ;-)
-
Very Active Member
Originally Posted by Fromridgewood
Thank you Everyone for your guidance on my floorboard inquiry. I'm not sure that I will be able to mount the used pair shown by Haze, so unless something else pops up I will probably bite the bullet also and go with Lamonster or Ultimate.
Regards and thanks for the fast response.
Fromridgewood
Might want to give Spyder Accessories out of Canada a look. I have his boards on my F3-T and love them, though they are pricey.
Al in Kazoo
Last edited by Peter Aawen; 03-31-2023 at 12:43 AM.
Reason: Fixed quote display ;-)
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|