-
Should a 2019 F3 have a factory fitted/stock Belt tensioner?
I just purchased a 2019 Can Am Spyder F3.
Question is--does it come from the factory with a belt tensioner?
Thank you
Last edited by Peter Aawen; 03-07-2023 at 03:22 PM.
Reason: Expanded title to briefly ask the question... ;-)
-
Very Active Member
-
Active Member
Here is a parts diagram for a 2019 f3. Item number 350. Part number 219800431.
https://www.canampartshouse.com/oemp...ve-system-rear
ASSEMBLIES WHERE 219800431 IS USED
2018 F3 S SM6 & SE6 - Rear Drive
2018 F3 T SE6 - Rear Drive
2019 F3 S SE6 - Drive System, Rear
2019 F3 S SM6 - Drive System, Rear
2020 F3 S SE6 - Drive System, Rear
2020 F3 S SM6 - Drive System, Rear
2021 F3 S - Special Series - Gravity Grey, (Built After Sept. 2020) - Drive - Rear Common Parts - North America
2021 F3 S SE6 - Monolith Black Satin, (Built After Sept. 2020) - Drive - Rear Common Parts - North America
2021 F3 S SE6, (Built Before Sept.2020) - Drive System, Rear
2021 F3 S SM6, (Built Before Sept.2020) - Drive System, Rear
Last edited by Tourer; 03-07-2023 at 03:40 PM.
-
-
Very Active Member
2019 F3-S would have one. Mine came with the belt tension-er from the factory.
-
My 2021 F3 Ltd did not come with one and I added the BRP one that I got from LaMonsterGarage that comes with a better wheel and bearing. Easy install.
-
Very Active Member
Originally Posted by foolofsand
I just purchased a 2019 Can Am Spyder F3.
Question is--does it come from the factory with a belt tensioner?
Thank you
I wouldn't buy one, it's not needed!!!! .... if that tensioner FAILS and it eats your belt it will cost you about $500+ (if it happens in your driveway - which is not likely ) ..... Good Luck .... Mike
Last edited by Peter Aawen; 03-08-2023 at 12:14 AM.
Reason: Caps & ' 's ;-)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|