|
-
 Oil filters - are these rubber pieces usually there?
I am looking to buy this specific filter. Looks like it will work in the Spyder
https://www.amazon.com/Hoypeyfiy-Mot...6388025&sr=8-3
My question is this. I do not recall my old oil filter having those rubber pieces on them. Or are they typically already on the oil filter?
Last edited by Peter Aawen; 02-14-2023 at 02:26 PM.
Reason: Expanded title to briefly Ask the question... ;-)
-
Doesn't say it's for a BRP 1330 spyder. go with BAJA Ron to be safe.
https://www.ads.spyderlovers.com/ads....php?zoneid=13
-
no way no thanks click on the seller
-
Very Active Member
 Originally Posted by acdcking12
I am looking to buy this specific filter. Looks like it will work in the Spyder
https://www.amazon.com/Hoypeyfiy-Mot...6388025&sr=8-3
My question is this. I do not recall my old oil filter having those rubber pieces on them. Or are they typically already on the oil filter?
Or go with Lamonster Garage to be safe also. Or Baja Ron
.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
search amazon for can am spyder 1330 oil filter
-
Originally Posted by honsfun
search amazon for can am spyder 1330 oil filter
NOT !!! Lamonster & BajaRon both have all the filters required. They ship FREE and supply all gaskets and O-rings in each kit. They started and sponsor the forum we are on! I will continue to get my filter supplies from them.
End of subject, MHO  Bill
Last edited by Knizar; 02-14-2023 at 01:59 PM.
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button"
 If in Doubt, Don't Do It! 
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
-
Very Active Member
Yes.
Without a teardown and close look at aftermarket filters it's a guessing game as to the quality. Same goes for genuine filters.I've used both and haven't had problems with any. A manufacturing fault can render any filter useless regardless of brand, country of origin or supplier. Support the forum guys if possible if not don't feel guilty it's your choice.
OIP.jpg
Kenda wars survivor
Registered crackpot
Informed consent
''Experts" say eating red meat makes the sun hot
-
Very Active Member
Count me in as a supporter of our site sponsor Lamonster Garage. His oil filter kits include everything you need and are excellent quality.
2020 RT Limited Deep Marsala Chrome
-
Active Member
Those filters do not fit your bike. OEM part number is 420956744.
I also recommend either Lamonster or BajaRon.
-
Very Active Member
Originally Posted by Tourer
Those filters do not fit your bike.
Actually they will. One of the interchange numbers is HF556 which is the number on the Hi Flo filter Baja Ron sells.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Very Active Member
You can play around with your oil to a point, but I would not play around with your filters! But it's your bike, your choice!
-
SpyderLovers Sponsor
Interesting. The description states;
The Hoypeyfiy oil filters trap harmful contaminants before they reach the carburetor, maintain the life of your machine engine.
A meaningless oversite, I'm sure. But amusing all the same. Especially considering that the Spyder doesn't have a carburetor. Even if the oil filter did have anything to do with the fuel system.
Last edited by BajaRon; 02-15-2023 at 06:25 PM.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Very Active Member
Originally Posted by Jetfixer
Count me in as a supporter of our site sponsor Lamonster Garage. His oil filter kits include everything you need and are excellent quality.
Lamonster Garage usually ships quickly.
I have bought several of the oil filter kits from Lamonster Garage.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
-
I bought these and they fit fine. Sorry for the trouble of asking a question.
-
SpyderLovers Sponsor
Originally Posted by acdcking12
I bought these and they fit fine. Sorry for the trouble of asking a question.
Yes, they will fit fine. As will the HF-556, the KN-556, etc.
Last edited by BajaRon; 02-16-2023 at 04:19 PM.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
(which isn't what the op asked). Anyone have specs on any filters we use regarding microns,number of pleats,material thickness,dimensions,etc and the reasoning behind those specs we could look into?
