Watch out if you installed Spyder Extras backrest rack

[mandytuning]

The Spyder Extras rack for BRP backrest comes with 4 spacers; top are 3/8, bottoms are 3/4. First thing I noticed, only 4 threads come from bottom long bolt. They are the most important bolts that hold the backrest to brackets! Other thing was if you try to tighten them, top will have a 1/2"gap that will bend the plate as seen in Slingmods pictures. I ended up replacing all 4 spacers with same size 1/2" and now it sits perfectly flush to the seat without creating stress to hardware or backrest threads. Cost me an extra $20 bucks. Makes honor to their name Spyder Extras

[Ex-Rocket]

I sure would email them and tell them they have a problem and explain to them what you did.

[mandytuning]

Yes i did. And to slingmods too. but nobody cares until someone get killed and you sue them.

[mandytuning]

Well, after some back and forth emails with pic and suggestions they are gonna retool and fix the angle so it can use 4 same length spacers. Thats what i call taking care of your customers