2014 -2021 RT OEM belt tensioner w/ Lamonster upgrade $75

[IdahoMtnSpyder]

It's gone, sold!

A Spyder ryder gave this to my brother who gave it to me. My brother recently passed so I have no way to find out its usage history. It looks like it was used very little.

This is the OEM belt tensioner for 2014 to 2021.5 RT built before Sept 2020. BRP instructions state it will not fit post Sept 2020 RTs. The pulley looks like it is the Lamonster upgrade. I don't know of any other pulley upgrade that it might be. The tensioner may have been bought from Lamonster Garage.

I'm asking $75 plus actual shipping cost. The package will weigh less than 2 lbs and be shipped from 83660. You tell me how you want it shipped. USPS is probably the cheapest.

OEM tensioner 1.jpg OEM tensioner 2.jpg OEM tensioner wear on pulley.jpg

I was going to post a link to the instructions but when I copy and paste the URL for the instructions the address will not paste into the message. I wonder if the forum s/w thinks the link is a scam/spam/malicious site link and automatically wipes it out. When I send the link via email it works.

Peter, any idea what's going on? Here' the URL. This is the only way I can get the URL to show in this post. Copy and paste should work.

https://brp.my.salesforce-sites.com/ISPublicArticleInfo/apex/BWLightningViewerWithTranslate?#id=kA00c000000slwnCAA&googtrans(en|en_US)

[AnthonyG]

Thats because you posted an invalid format of a url

[IdahoMtnSpyder]

Thats because you posted an invalid format of a url

Sorry, I did not! The URL in my post above is a direct copy from the address bar of the BRP page for that instruction. When I highlight the URL above and right click on it Firefox offers the option to go the link. I also copied the URL from the post into Edge from which I had cleared the entire history. In both cases the instruction page opened right up!

I will copy the URL into this post directly below this line.

I see the URL in the edit box. I will now move to the Go Advanced option.

The URL is no longer in this post, not in either the edit box nor in the preview of the post.

[Valkrocket]

I copy and pasted your link into my browser. Works fine idaho.

[AnthonyG]

Sorry, I did not! The URL in my post above is a direct copy from the address bar of the BRP page for that instruction. When I highlight the URL above and right click on it Firefox offers the option to go the link. I also copied the URL from the post into Edge from which I had cleared the entire history. In both cases the instruction page opened right up!

I will copy the URL into this post directly below this line.

I see the URL in the edit box. I will now move to the Go Advanced option.

The URL is no longer in this post, not in either the edit box nor in the preview of the post.

That would be incorrect.

https://brp.my.salesforce-sites.com/ISPublicArticleInfo/apex/BWLightningViewerWithTranslate?#id=kA00c000000slwnCAA&googtrans(en|en_US)

^ Invalid url

https://brp.my.salesforce-sites.com/...c000000slwnCAA

[IdahoMtnSpyder]

That would be incorrect.

https://brp.my.salesforce-sites.com/ISPublicArticleInfo/apex/BWLightningViewerWithTranslate?#id=kA00c000000slwnCAA&googtrans(en|en_US)

^ Invalid url

https://brp.my.salesforce-sites.com/...c000000slwnCAA

^ Invalid url

https://brp.my.salesforce-sites.com/...c000000slwnCAA

Valid URL! See my comments here. https://www.spyderlovers.com/forums/...=1#post1657592