Results 1 to 4 of 4
  1. #1
    Registered Users
    Join Date
    Sep 2015
    Location
    Kansas city mo
    Posts
    90
    Spyder Garage
    0

    Default Any slick ideas for Mounting on/off switch for driving lights?

    Anybody have a slick idea for mounting the on/off switch for 2 Black Oak pod lights which will be on the upper suspension arms?
    Thanks
    Last edited by Peter Aawen; 01-06-2023 at 05:16 PM. Reason: Expanded title to briefly ask the question... ;-)

  2. #2
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,143
    Spyder Garage
    2

    Default

    Quote Originally Posted by staneric View Post
    Anybody have a slick idea for mounting the on/off switch for 2 Black Oak pod lights which will be on the upper suspension arms?
    Thanks
    Disregard - Tell us what you are riding, Staneric. That will be beneficial in providing options

    Update…..My apologies…….I was looking at “what’s new” and missed the fact it was in the Ryker section…..even so, a make/model in your signature line would prevent this from happening in future, Staneric

    Pete
    Last edited by Peteoz; 01-06-2023 at 03:50 PM.
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  3. #3
    Active Member DickB's Avatar
    Join Date
    Jun 2021
    Location
    FL
    Posts
    280
    Spyder Garage
    0

    Default

    There's room on the left switch pod to add a switch. I added three for Rostra cruise control. You can run wires through the existing loom for a factory look.


    cruise1.jpg

  4. #4
    Member
    Join Date
    Dec 2022
    Location
    South Carolina
    Posts
    1
    Spyder Garage
    0

    Default

    Quote Originally Posted by DickB View Post
    There's room on the left switch pod to add a switch. I added three for Rostra cruise control. You can run wires through the existing loom for a factory look.


    cruise1.jpg
    Looks good Dick. A+

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •