Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Sep 2022
    Location
    fl
    Posts
    21
    Spyder Garage
    0

    Default Where can I get #5 brake and shifter rods? BRP Not in Stock!

    Hi I have a 2018 f3 sm6 and was wondering where I can purchase the brake and shifter rods so I can move the pegs to the number 5 position. The brp website says not in stock. Any info would be great.
    Last edited by Peter Aawen; 11-15-2022 at 05:40 PM. Reason: Expanded Title to briefly ask the question ;-)

  2. #2
    Very Active Member IGETAROUND's Avatar
    Join Date
    Oct 2011
    Location
    Kalamazoo, Mi
    Posts
    1,819
    Spyder Garage
    1

    Default

    Ebay comes to mind

    Al in Kazoo
    All the great movements in the world began with a cup of coffee!

    2018 F3-T


    My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
    2018 F3-T , Pearl White

  3. #3
    Member
    Join Date
    Sep 2022
    Location
    fl
    Posts
    21
    Spyder Garage
    0

    Default

    Ipilot put me onto them on ebay and I got them ordered

  4. #4
    Very Active Member Isopedella's Avatar
    Join Date
    Feb 2022
    Location
    New Zealand
    Posts
    1,019
    Spyder Garage
    1

    Default

    Make your own or get a Bloke to make it. Nothing special. The only specie is the length, the gap and the hole size. Tip, measure the holes.

    bar 1 2 20220524_084110.jpg

    bar 2 1 20220524_084136.jpg
    Last edited by Isopedella; 11-16-2022 at 12:14 AM.

  5. #5
    Active Member
    Join Date
    Feb 2020
    Location
    CT and ME
    Posts
    257
    Spyder Garage
    1

    Default

    I wouldn't trust the BRP site for inventory. If you can't find them on ebay call a dealer and have them order the parts.


    My Mods:
    Elka Stage 5 rear shock with spring preload adjust
    Monster Stage 2 ECU
    Pedal Commander
    RLS cat delete
    Baja Ron sway bar
    Baker Air Wings upper and lower
    Viking saddle bags
    Third pegs
    Vredestein tires front and rear
    Mad Stad windshield
    X-creen windshield deflector
    Front and rear drive cam
    Garmin Zumo XT
    Heated gear wiring
    Lamonster LED headlights
    Lamonster LED foglights
    Lamonster frame mount cupholder
    BRP heated handgrips
    Lamonster drivers backrest
    BRP passenger backrest
    Lidlock handlebar end helmet locks
    Barkbusters Storm handguards
    2020 F3S-SS , Titanium/Black

  6. #6
    Active Member GRHorst's Avatar
    Join Date
    Mar 2022
    Location
    PA
    Posts
    87
    Spyder Garage
    0

    Default

    I purchased an aftermarket brake connecting rod because I wanted a slightly different length. The reason is to lower the height of the brake pedal a bit. It makes it much easier to move my foot to the brake pedal (and faster too) since I no longer have to lift my whole leg to get my foot on the brake.
    _________________________________
    GR Horst - Reading, Pennsylvania, U.S.A.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •