-
Active Member
After advice installing battery tender cable to my seat area?
So I'm flying to Louisville next week to pick up a new used 2021 RT and ride it home to California via Houston. Heading south!! Weather is turning cold and decided it would be best to use my heated gear. Will need to hook up to the battery and run my wires in the parking lot of my hotel before I leave, So looking for advice in advance. I understand the battery needs to be removed to access an opening, am I right? for sure the one small panel on the left, but can I fish the cables without removing the large panel? Thinking a heavy duty 24" zip tie to fish the cable. Trying to minimize the procedure and have a plan. I'm sure I'm bringing all the tools needed. Thanks in advance!
-
Very Active Member
You will not have to remove the battery to get access but you will have to remove the cover. My suggestion would be to tape a string to the front of the zip tie and feed it from the seat area forward to an open area. then you should be able to feed it from there to the top of the battery. Don't forget to put an inline fuse.
-
Active Member
Thanks EdMat! So there is an access point in the Frunk area?
-
Very Active Member
Originally Posted by PJveetwin
Thanks EdMat! So there is an access point in the Frunk area?
Yes
Al in Kazoo
All the great movements in the world began with a cup of coffee!
2018 F3-T
My mods: Can am Trailer hitch, USB and 12 volt power outlets, Gustason windshield, Bead rider seat cushion, battery harness for electric gear and battery tender, Time out trailer.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|