Results 1 to 2 of 2
  1. 09-05-2022, 08:36 AM #1
    Revjames
    Revjames is offline
    Active Member
    Join Date
    May 2020
    Location
    Walker, LA
    Posts
    104
    Spyder Garage
    1

    Default Anyone installed Top Case LED Kit from TricLED? Any advice?

    Has anyone installed the TricLED Top Case LED Kit Top running red, brake and yellow turn signal on a 2020 or newer RT Limited? Any advice you can offer on wire routing from front of top case back to tail light harnesses? Thanks in advance.
    Last edited by Peter Aawen; 09-05-2022 at 07:04 PM. Reason: Expanded Title to briefly ask the question ;-)
    Reply With Quote Reply With Quote
  2. 09-05-2022, 12:58 PM #2
    Jetfixer
    Jetfixer is offline
    Very Active Member Jetfixer's Avatar
    Join Date
    Feb 2016
    Location
    Lake Wylie, South Carolina, USA
    Posts
    1,046
    Spyder Garage
    2

    Default

    Just finished installing them on a friends 2022 F3L. The main difference is that the F3 topcase is not meant to be completely removed so the wiring is more "permanent". On the RT, you'll have a hard time wiring them so that the case can be easily removed. There are 3 screws on each side of the top case lower side covers. Remove them and the side covers will drop down and off. I ran the led strip wires under these covers and into the main area under the topcase. From there you can go to the tail light harnesses. Remember to disconnect them at the "y" cord if you want to completely remove the topcase in the future.
    2020 RT Limited Deep Marsala Chrome

    2020 RT Limited , Marsala Red
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules