Check these out. I have them on my 2020 RT L and like them a lot. It's a pretty easy install, too. It looks like there's plenty of room for your floorboard lights. They are adjustable left to right and front to back.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
Your saying OEM floorboard lights, like they come as standard equipment. I just bought a 22 RTL. No lights on my floorboards. Do you mean BRP sells them if you want to add?
Your saying OEM floorboard lights, like they come as standard equipment. I just bought a 22 RTL. No lights on my floorboards. Do you mean BRP sells them if you want to add?
You can purchase lighted floorboards from BRP for your 2022 RT-L
BRP does make their own floorboard lights P/N 219401038. Matter of fact they just came out with the passenger floorboard lights as well P/N 219401153 and I already have an order in for them once they are released in October. https://can-am-shop.brp.com/on-road/...re-lights.html
The BRP light are white only, they do not switch to amber for turn signal function but they are a good quality light assembly that bolts to the bottom of the floor board and is a plug and play wiring them.
BRP does make their own floorboard lights P/N 219401038. Matter of fact they just came out with the passenger floorboard lights as well P/N 219401153 and I already have an order in for them once they are released in October. https://can-am-shop.brp.com/on-road/...re-lights.html
The BRP light are white only, they do not switch to amber for turn signal function but they are a good quality light assembly that bolts to the bottom of the floor board and is a plug and play wiring them.
I have the Passenger floorboard lights on order since they were announced. Its November now. Where are they? I would like to get them before the snow flies here in MN.
I have the Passenger floorboard lights on order since they were announced. Its November now. Where are they?
Same here. I'm not really in any hurry but you would think they would have had them in stock by now. Afterall, there is no chip involved. Only the castings and led strips.
2022 Petrol Metallic RT Limited / 'PYDER'
There's no place like G28 X0 Y0 Z0
The fact that they are hella bright so you get seen much better (day and night and especially from the side). They are of impeccable quality. And they look really, really good on the Spyder. Combine them with the A Arm led strips from Sling Mods and it will completely transform the look of your Spyder. Especially at night.
2022 Petrol Metallic RT Limited / 'PYDER'
There's no place like G28 X0 Y0 Z0
I spoke to a good friend of mine that is the Northeast Regional Territory Rep for BRP and he said that the passenger floorboard lights will not become available until they start shipping the 2023's and even then they will be several months behind so I would not look for them until at least spring time frame.
As for the Highway Pegs that can be used with the OEM floorboard lights, I worked with Keith and Nick at Spyder Extras and they sent me a set of the highway pegs along with an assortment of spacers and I came up with what we all thought to be a relatively easy fix. They are going to be updating their website along with Slingmod's sometime in the very soon future so that you will need to order them for the OEM floorboard lights or without.
I spoke to a good friend of mine that is the Northeast Regional Territory Rep for BRP and he said that the passenger floorboard lights will not become available until they start shipping the 2023's and even then they will be several months behind so I would not look for them until at least spring time frame.
As for the Highway Pegs that can be used with the OEM floorboard lights, I worked with Keith and Nick at Spyder Extras and they sent me a set of the highway pegs along with an assortment of spacers and I came up with what we all thought to be a relatively easy fix. They are going to be updating their website along with Slingmod's sometime in the very soon future so that you will need to order them for the OEM floorboard lights or without.
I know this is an older post, but curious….
Are these the Highway pegs you sampled from them?
Did you ever come across anything you were able to make work for you?
Thanks
Bill
I installed the highway pegs LaMonster sells even though they say they won't work with the BRP floorboard led's. I had to grind the mounting bracket on a slight angle to make clearance. Not a hard job at all and probably took 5 minutes per side with my bench grinder. I initially started with a Dotco but it was taking too long so I switched to the grinder. They fit just fine with a little tweaking.
Last edited by FrogmanDave; 03-18-2023 at 01:33 PM.
2022 Petrol Metallic RT Limited / 'PYDER'
There's no place like G28 X0 Y0 Z0
I installed the highway pegs LaMonster sells even they say they won't work with the BRP floorboard led's. I had to grind the mounting bracket on a slight angle to make clearance. Not a hard job at all and probably took 5 minutes per side with my bench grinder. I initially started with a Dotco but it was taking too long so I switched to the grinder. They fit just fine with a little tweaking.
Thanks, I’ll look into some of his kits…any suggestions or just any of them?
I have those on my 2020 RT Limited. They're very nice.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
Any Highway Pegs for a 2022 RTL with OEM Floorboard Lights?
Reply With Quote
Originally Posted by Indiana Ken
Looking forward to putting on some miles soon!
