-
Anyone have an ISCI hand brake system on a 2014 RT-S? Need fitting info/advice?
I am installing a iSCI hand operated brake system on my 2014 RT-S, and am having problems with the routing of the brake hose through / around the handlebar stem / facia plate.
The instructions supplied by ISCI tend to deal with an earlier model.
Does anyone have this kit fitted to their RT-S, and can possibly give me some hints.
Does the hose go under the glove box and small switch panel, or is it fed further forward from the right hand side of the bike and does a sharp turn behind the handlebar stem, or is a slotted hole cut into the facia panel?
Any help would be appreciated.
Last edited by Stephenaspr; 08-01-2022 at 01:36 AM.
-
I have this exact set up on my 2014 RTS...I don't remember the hose routing...I used the supplied instructions...
If I can look without taking a lot of panels off I will...
I don't remember cutting a slotted hole, BUT its been since 2015...
Contact me thru the PM option & MAYBE I can take and send pictures...
larryd
-
Originally Posted by Stephenaspr
I am installing a iSCI hand operated brake system on my 2014 RT-S, and am having problems with the routing of the brake hose through / around the handlebar stem / facia plate.
The instructions supplied by ISCI tend to deal with an earlier model.
Does anyone have this kit fitted to their RT-S, and can possibly give me some hints.
Does the hose go under the glove box and small switch panel, or is it fed further forward from the right hand side of the bike and does a sharp turn behind the handlebar stem, or is a slotted hole cut into the facia panel?
Any help would be appreciated.
Sent you a PM.
-----
Joshua
2012 Victory Vision
2016 Spyder F3S
2019 Spyder RT Limited
-
Very Active Member
Originally Posted by Stephenaspr
I am installing a iSCI hand operated brake system on my 2014 RT-S, and am having problems with the routing of the brake hose through / around the handlebar stem / facia plate.
The instructions supplied by ISCI tend to deal with an earlier model.
Does anyone have this kit fitted to their RT-S, and can possibly give me some hints.
Does the hose go under the glove box and small switch panel, or is it fed further forward from the right hand side of the bike and does a sharp turn behind the handlebar stem, or is a slotted hole cut into the facia panel?
Any help would be appreciated.
I installed the ISCI handbrake on my 2016 RT-S last summer. Here is a link where I have some photos. The hand brake install is about half way down the page.
https://www.spyderlovers.com/forums/...pyder-RT-S-SM6
Forum
RT Shop Talk
Anyone have an ISCI hand brake system on a 2014 RT-S? Need fitting info/advice?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|