|
-
 Anyone disconnect that auto-locking front trunk mechanism?
Hello fellow Ryker riders! Lots of interesting things to browse here...
I just got a 2022 Rally Edition a few weeks ago, and loving it.
One thing I'd be curious if anyone has done, is to disconnect that auto-locking front trunk mechanism. Yeah, the one where the bike needs to be "on" that works sometimes, and sometimes it won't...
I don't need it to lock. Just latch closed and open it when I push on it.
Simple as a fuse? Or do I need to dig in an pull some wires, or remove a solenoid / pin?
Hoping it's a simple "mod" !
Thanks in advance!
Conor
Last edited by Peter Aawen; 07-08-2022 at 07:14 AM.
Reason: Revised title to briefly ask question... ;-)
-
Active Member
Did not know it did that....
-
Very Active Member
My 2020 did not have that. It was an accessory, BRP part # 219401136.
Look at the locking mechanism and determine what is activated when there is power to the lock.
That should give you a clue as to how to modify it.
23 Moto Guzzi V7-850 SE 23 Yamaha XT250 18 Yamaha Bolt R-Spec 22 Triumph Street Twin 20 CanAM Ryker 900 14 Honda CB1100 18 Yamaha XT250 16 Moto Guzzi V7 II 17 Yamaha TW200 12 Triumph Bonneville 02 Sportster 1200 Sport 03 Sportster 883 76 Honda CB750F 75 Honda CB360 70 Yamaha CT1 72 Yamaha CT2 72 Yamaha AT2/CT2 70 Honda SL350 70 Honda CL350 67 Honda CL160 67 Honda CB160 62 Honda CA110
 
2020 900 , NGK 4218 iridium CR8EIX Matte black
-
Sling-Mods has a manual pushbutton latch with locking key that can be installed. This eliminates the "Key On Problem" in opening the front trunck.
-
You can remove the side panels and frunk box . There is a wiring harness connected to the trunk lock , disconnect the frunk lock harness and it will be able to open or close anytime , bike on or off it will work manually .
-
Very Active Member
 Originally Posted by Tucker01
You can remove the side panels and frunk box . There is a wiring harness connected to the trunk lock , disconnect the frunk lock harness and it will be able to open or close anytime , bike on or off it will work manually .
I had a problem with it opening the other day but when I got off the bike and pressed from a different angle it worked fine. You can disconnect as said above!!
2015 F3 sm6, Custom Dynamics fender lights.
Sea Doo GTI-SE 90 Jet Ski!!
-
Yep. Remove front panels and frunk. Disconnect harness. It will work without locking.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote