Thanks again Bruce for the TEMPLATE of this device ..... I traced it onto a small piece of scrap " Trex " ( plastic wood " and made my own, this stuff isn't super strong but enough for this project. It is extremely easy to cut and shape..... I shaped it slightly different so it would work better ( imho ) ...... I'm surprised the " how to video " didn't advise removing the passenger backrest.... having access from both sides makes installing 10 X's easier ..... If anyone wants a copy mail me a stamp and I'll send it to you .....
PS: ... after making this I decided ... to NOT cut out the shape as pictured, it's much easier to cut out the shape and Leave the " Thumb " piece off .... then add it later by gluing a similar shaped THUMB piece .... If you see the shape you will understand ./.....Mike
PPS: .... for anyone thinking copying this may be illegal .... it's not, just so long as you're only making one for yourself .....
Last edited by Peter Aawen; 06-11-2022 at 08:55 PM.
Reason: Fixed PS: display
Installed a Rear trunk lid lock - Works great!
Reply With Quote
Originally Posted by safecracker
) ...... I'm surprised the " how to video " didn't advise removing the passenger backrest.... having access from both sides makes installing 10 X's easier ..... If anyone wants a copy mail me a stamp and I'll send it to you ..... 
