Results 1 to 5 of 5
  1. #1
    Active Member
    Join Date
    Mar 2020
    Location
    Western New Mexico (Thoreau)
    Posts
    250
    Spyder Garage
    0

    Question 2021 RTL - will the adj windshield arms hold a bigger screen?

    Looking at a 7Jurock 28 inch tall and three inches wide (each side) windshield without vent! Concerned with the pressure it will apply to the adjustable shield arms? Anyone have any issues with this?
    2021 Spyder RT-L - Asphalt Grey
    • Vredestein tires all around
    • Rolo Laser Alignment
    • Lamonster tire balancing rings/front
    • Lamonster Sway Bar
    • Lamonster belt tensioner
    • K and N air filter
    • Rear cowl - in place when you remove rear box


  2. #2
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,164
    Spyder Garage
    2

    Default

    No issues so far for me running an F4 at 27”, Don. It does have a vent in the middle, but it is mostly closed.

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  3. #3
    Active Member
    Join Date
    Mar 2020
    Location
    Western New Mexico (Thoreau)
    Posts
    250
    Spyder Garage
    0

    Default

    7Jurock are not willing to put a vent in the windshield! Waiting on their quote for the windshield. Have looked at the F4, 27 inch wide version with vent. Just hoping 7Jurock will beat the price? Will compare price and make a decision! Thanks
    Last edited by Peter Aawen; 05-22-2022 at 07:33 PM. Reason: their ;-)
    2021 Spyder RT-L - Asphalt Grey
    • Vredestein tires all around
    • Rolo Laser Alignment
    • Lamonster tire balancing rings/front
    • Lamonster Sway Bar
    • Lamonster belt tensioner
    • K and N air filter
    • Rear cowl - in place when you remove rear box


  4. #4
    Very Active Member Peteoz's Avatar
    Join Date
    Jun 2016
    Location
    Harrington, Australia
    Posts
    4,164
    Spyder Garage
    2

    Default

    Quote Originally Posted by Don60 View Post
    7Jurock not willing to put vent in the windshield! Waiting on there quote for the windshield. Have looked at the F4, 27 inch wide version with vent. Just hoping 7Jurock will beat the price? Will compare price and make a decision! Thanks
    Don, just to clarify, the F4 shield currently made for the ‘20+ RT is actually 28”. I am using a slightly modified F4 screen from my F3-L (drilled a couple of extra holes), just get an idea whether to invest in the F4 28” screen made for the RT (I will need a taller screen when my 2” taller Daylong seat eventually turns up out here.

    Pete
    Harrington, Australia

    2021 RT Limited
    Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.

    HeliBars Handlebars
    Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
    Ikon (Aussie) shocks all round.
    Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
    Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
    Kenda Kanine rear.
    2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red

  5. #5
    Active Member
    Join Date
    Mar 2020
    Location
    Western New Mexico (Thoreau)
    Posts
    250
    Spyder Garage
    0

    Default

    Good to know! Will decide once I get information from 7Jurock! Thanks
    2021 Spyder RT-L - Asphalt Grey
    • Vredestein tires all around
    • Rolo Laser Alignment
    • Lamonster tire balancing rings/front
    • Lamonster Sway Bar
    • Lamonster belt tensioner
    • K and N air filter
    • Rear cowl - in place when you remove rear box


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •