Know the name of the Connectors for Kuryakyn Bullet lights?

[Leone]

2015 F3-s SE6: Anyone know the name/part number for wire connectors used on mirror turn signals. Bought kuryakyn bullet turn signals, but included connectors don't work. All ideas appreciated.

[Bfromla]

Included connectors would be contacting Kuryakyn for replacements. If you are sure you installed per instructions. Able to test lights separately off the bike?

[Leone]

I should have been clearer. The mirrors have a male/female wire connectors. The 2 wires from the mirror go into the female connector. The 4 wires from the bike go into the male connector. The kuryakyn lights have 2 wires. I can T-tap them into the wires from the bike,but I would rather wire them into a female connector similar to the one on the mirror. I'm really looking for the type/ name of the wire connectors use on the mirror turn signal. Hope this makes sense. Kind a new to this.

[jiffy]

I purchased MUYI connector pig tales from amazon for the mirror to Kuryakyn turn signals that replace the mirrors. I have a 2015 F3S-SE6.

[BertRemington]

AMP SuperSeal. Sold at Amazon. Made by many including Muyi. I bought connectors and made my own jumpers. Proper crimp tool is nice but needle nose pliers are adequate.

[Leone]

I purchased MUYI connector pig tales from amazon for the mirror to Kuryakyn turn signals that replace the mirrors. I have a 2015 F3S-SE6.

Jiffy, was it the MUYI 9006 connector? If not, can you give me the model number? How is the conversion working for you?

[Leone]

AMP SuperSeal. Sold at Amazon. Made by many including Muyi. I bought connectors and made my own jumpers. Proper crimp tool is nice but needle nose pliers are adequate.

Thanks!

[jiffy]

These are the connectors I purchased. I used Lamonster factory mirror to aftermarket turn signal adaptors. I purchased Kuryakyn lights elsewhere. They are working great.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1