I have a moisture stain on the inside of my instrument cluster ( 2015 F3s ) caused by condensation. Have any of you opened the cluster to clean the inside of the lense? I am guessing there are a few out there with the same issue. Your ideas, suggestions and pictures would be greatly appreciated.
Willie
It looks like there’s a lens in front of the cluster that can be removed. Part 349a. I bet if there is moister its on that lens not inside the actual gauge. Dash would need removed. Watch Pierre’s videos on how to replace/remove the dash.
Last edited by Wmoater; 05-04-2022 at 08:38 AM.
“Born to Ride......Ride to Live....MOATER ON !
“Current ride: 2017 RT Limited”
I have replaced the acrylic cover and not that hard to do. After removing the cluster, there are a few tabs around the outside, use a small screwdriver to release tabs and it will pull off. When cleaned just snap back on
2019 F3 Limited, Black with Wrap My Spyder red racing stripes
BajaRon sway bar
La Monster LED headlights
LED fog lights
F4 Customs 21" tinted windshield
Ultimate red trimmed seat/driver backrest
Ram quick grip phone holder
Cardo Packtalk Bold headsets