Results 1 to 8 of 8
  1. #1
    Active Member Mike0123's Avatar
    Join Date
    May 2020
    Location
    Rhode Island
    Posts
    187
    Spyder Garage
    1

    Default Adjusting rear trunk latch on ‘21 RTL

    So, I’m sure this is on the forum someplace, but as usual I cannot find anything. I thought Sean Smoak had it in a video, but can’t find that either.

    Anyway, I am tearing my hair out trying to adjust the rear trunk lid latching. I need to push down on it “mightily” to get it to latch closed. It opens OK, maybe not as smooth as I would like, but closing it is a nightmare. I’ve loosened the little post tings and moved them back and forth, but just cannot get it to work. If I could describe what the current situation feels like, it would be that the posts are too short. I know thats probably not the case, but since I can get it to latch by pressing the bejeezus out of it, thats what I think. I swear I’m lucky not to be popping the air suspension!

    There has to be a way...please???!!???

    Thanks as always,
    Mike
    2021 RT Limited in Marsala Red & chrome (9/20)
    2006 Yamaha Royal Star Venture - Black Cherry
    2003 Suzuki Volusia - Black w/ Gold
    1973 Honda CL350 - Hawaiian Blue

    2021 Limited , MArsala Red & Chrome

  2. #2
    Very Active Member Isopedella's Avatar
    Join Date
    Feb 2022
    Location
    New Zealand
    Posts
    1,019
    Spyder Garage
    1

    Default

    When I picked my new 2017 F3 to me all latches were hard to operate. I lubed them and now they all work smooth as silk. Just saying.
    If you have to push down a lot to get it to engage it may be too high.

  3. #3
    Very Active Member K80Shooter's Avatar
    Join Date
    Dec 2020
    Location
    Hartwell, Ga
    Posts
    1,417
    Spyder Garage
    1

    Default

    Lube it then try it a few times before messing with it further.
    2020 RT Limited Chrome , Petrol Blue

  4. #4
    Active Member kroache's Avatar
    Join Date
    Mar 2021
    Location
    Caledon, Ontario
    Posts
    52
    Spyder Garage
    0

    Default

    This might be the one you are looking for.
    Cheers
    Kevin

    https://www.youtube.com/watch?v=MVq0...TheSmoaksVlogs
    2020 RT Limited - Chalk Metallic Dark

  5. #5
    Active Member Mike0123's Avatar
    Join Date
    May 2020
    Location
    Rhode Island
    Posts
    187
    Spyder Garage
    1

    Default

    Quote Originally Posted by kroache View Post
    This might be the one you are looking for.
    Cheers
    Kevin

    https://www.youtube.com/watch?v=MVq0...TheSmoaksVlogs
    Yes! Thank you... well if anyone else is looking, watch this one. About halfway through, when he is going to adjust his S2S trunk a message flashes on the screen telling you to watch their vlog 2054 for an easy way to adjust it! That’s the real one to watch.
    Sweet, thank you so much.
    2021 RT Limited in Marsala Red & chrome (9/20)
    2006 Yamaha Royal Star Venture - Black Cherry
    2003 Suzuki Volusia - Black w/ Gold
    1973 Honda CL350 - Hawaiian Blue

    2021 Limited , MArsala Red & Chrome

  6. #6
    Very Active Member ThreeWheels's Avatar
    Join Date
    Feb 2010
    Location
    Danbury Connecticut
    Posts
    3,468
    Spyder Garage
    0

    Default

    Thanks. I've had to adjust each and every latch on my 2020 RT Limited.
    First the Frunk, then the seat latch, then the two side bags.
    This was the last piece to make it so the Phenomenal Beth can easily open the rear trunk.
    Thank you so much.
    Last edited by ThreeWheels; 05-03-2022 at 02:26 AM.
    If it ain't broke, don't break it.
    IBA #47122
    2020 RT Limited Asphalt Grey

  7. #7
    Active Member
    Join Date
    Aug 2020
    Location
    Georgia
    Posts
    300
    Spyder Garage
    0

    Default

    Part of the issue with the side case latches on the 2020 is the poor way that BRP designed the cable routing: At the end of the cable where it mates with the release lever the cable wire has to make a "hard" angle to the release mechanism. The cable binds exiting the cable housing. In other words, unlike a motorcycle brake or clutch cable or similar, where the wire goes straight in and straight out, the wire is going in and out of the cable housing at an angle.

    I have to push inward on the side case before pulling the release lever and it causes me to cringe each time I tug on the lever because I have already broken one of the release mechanisms and they are a real pita to replace.
    Sold: 2020RT base with numerous improvements and farkles
    Previous 2 wheels: 3 BMWs, 1 Honda, 1 Yamaha and 1 Husqvarna

  8. #8
    Very Active Member K80Shooter's Avatar
    Join Date
    Dec 2020
    Location
    Hartwell, Ga
    Posts
    1,417
    Spyder Garage
    1

    Default

    Here is the Vlog_2054 I found it by accident.

    https://www.youtube.com/watch?v=2ymUwJnCNrs
    2020 RT Limited Chrome , Petrol Blue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •