|
-
SpyderLovers Sponsor
-
Ozzie Ozzie Ozzie
-
Very Active Member
-
Very Active Member
Ah yes those were the days. Peter can you remember what he sells maybe that will help.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
I've done a couple of those before, but not that way! I did'm vertically. I set'm in there with the tractor. My most painful experience with a splitter was splitting butt cuts.
-
Active Member
Former Navy LT, Retired Chemical Dependency Therapist, Retired Widower, "Do, or do not, there is no try"... Jedi Master Yoda.
Proud member of AA, PGR, and a Navy Shellback! 
-
 Originally Posted by obiwanbill
Harry Reems?
OMG LOL! I thought he looked familiar...
 
My Mods:
Elka Stage 5 rear shock with spring preload adjust
Monster Stage 2 ECU
Pedal Commander
RLS cat delete
Baja Ron sway bar
Baker Air Wings upper and lower
Viking saddle bags
Third pegs
Vredestein tires front and rear
Mad Stad windshield
X-creen windshield deflector
Front and rear drive cam
Garmin Zumo XT
Heated gear wiring
Lamonster LED headlights
Lamonster LED foglights
Lamonster frame mount cupholder
BRP heated handgrips
Lamonster drivers backrest
BRP passenger backrest
Lidlock handlebar end helmet locks
Barkbusters Storm handguards
-
Very Active Member
 2011 RTS 2006 Yamaha Morphous
2017 F150 2015 MINI Cooper S IBA 56167
-
Very Active Member
Originally Posted by BajaRon
Back in the day, I knew a guy...
Is he missing a finger that his dog bit off. If anyone knows that answer you do, and everyone else that saw the picture he posted.
-
Very Active Member
Originally Posted by wyliec
Is he missing a finger that his dog bit off. If anyone knows that answer you do, and everyone else that saw the picture he posted.
Ok now I want to hear that story
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
-
Very Active Member
I wonder if “Stump Buster” was his porn star name, to go with that moustache  
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
SpyderLovers Ambassador
Pictures? ?
 ...Well, after giving it some serious.... ....thought, I really don't know.
But, it could be and this is just a guess mind you.......
the man living in TENNESSEE? ........
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Very Active Member
Originally Posted by pegasus1300
Ok now I want to hear that story
A while back there was a discussion on dog breeds and when a specific breed was mentioned there was a member that took offense to what was said. I won’t mention the breed b/c this member either bred them or trained them or both, and did not like the breed getting a bad rap. It was during the discussion that Lamont showed what happen when he got between his dog and the dog’s food; part of his finger was missing.
-
Member
Yikes.... I saw that picture in Greeneville the other day. 
-
Probably lost the finger in the wood splitter. Having a dog bite it off sounds less Darwinish.......
-
SpyderLovers Ambassador
Who is this Guy?
Originally Posted by BajaRon
Back in the day, I knew a guy...
I posted my best guess. Please let everyone know. Thanks for your time. ....
See my post...#12. ......
Last edited by Little Blue; 05-04-2022 at 06:09 AM.
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Greeneville TN, knows a lot about Spyders, well maybe more than a lot.
-
SpyderLovers Sponsor
Yes, I think everyone knows this is Lamont. Probably circa 1984, if I had to guess. He might have a better date. He's always making something and this is one of his productions. One of the novel treatments is that we put the hydraulic oil in the 3" x 9" steel tubing which eliminated the tank and lent a lot of surface area for heat dissipation. The oil returned to the wedge end and intake was at the other end. I designed it and he made it work. That is one of the smaller logs that we split with it.
I used to be skinny too! But I don't have pictures to prove it....
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Reply With Quote
. Sure of it... just can't get the name out right now??? 
. I'm pretty sure he's a Spyder Ryder, had a few other biiiig bikes too. Handy with a spanner....... makes all sorts of good stuff for Spyders.... 
. Dammit, just can't think of the right name! 
. Might hafta scroll thru the sponsors list, I reckon he's in there somewhere?? 
