-
Very Active Member
Do Lamonster links need washers on Sway Bar kit?
So I ordered a Baja Ron with link set bar kit for my F3 and it here.
Looking at the bits there don’t seem to be any of those washers I have read about.
The kit has Lamonster arms and possibly the spacers are already attached to the ball joint.
The instructions say to fit the washers (that I don’t have in the kit). Anybody help out?
VCLqQR5Cy0BOqj0-1AzON2.jpg
my links 5u3qB_XmA34T0uY_s6ywT.jpg
-
Very Active Member
News flash.
I did send a query to Lamonster about this.
Got a reply in little over 1 hr. Just now after I posted this thread.
"You don't need the spacers with the Lamonster links"
Kinda figured that but was unsure, best to be correct I reckon.
So boys and girls there you have the answer.
Haha . What a learning these Spyders are for me.
Last edited by Isopedella; 04-14-2022 at 03:43 PM.
-
Very Active Member
Originally Posted by Isopedella
So I ordered a Baja Ron with link set bar kit for my F3 and it here.
Looking at the bits there don’t seem to be any of those washers I have read about.
The kit has Lamonster arms and possibly the spacers are already attached to the ball joint.
The instructions say to fit the washers (that I don’t have in the kit). Anybody help out?
VCLqQR5Cy0BOqj0-1AzON2.jpg
my links 5u3qB_XmA34T0uY_s6ywT.jpg
This is just another example of how Lamont improves a design and makes it better and easier to install.
I had "fun" installing those washers.
SIGNATURE PIC CURRENTLY UNDER CONSTRUCTION
2016 Toyota Sienna SE - hers
2002 BMW 325i - his
1994 Chevrolet Silverado K1500 Sportside Z71 - whoevers vehicle is in the shop
2009 Harley-Davidson Sportster XL883 Low (Vivid Black) - his
2018 Can-Am Spyder RT Limited - hers
2007 Harley-Davidson Sportster XL883 Low (Pearl White) - hers (SOLD 02/29/20)
2011 Tao Tao 50 - whoevers bike is in the shop
2007 Reinell 186 FNS - the dog's
1995 Fleetwood Flair 27R - EVERYBODY'S !
-
Very Active Member
Greg Kamer
"It's better to be not riding and wishing you were than be riding and wishing you weren't."
USAF, 20 years, retired
Sheriff's Office, 23 years, retired
2018 Can Am Spyder RT-Limited
-
Active Member
When I installed my links with spacers (BaJRon)--I put a small drop of super glue on the spacers to the links as advised by someone on this site--forgot who but it worked great and made for an easy install
2021 Spyder RTL Red, 2024 Triumph Speed 400, blue
-
SpyderLovers Sponsor
Originally Posted by arkyleo
When I installed my links with spacers (BaJRon)--I put a small drop of super glue on the spacers to the links as advised by someone on this site--forgot who but it worked great and made for an easy install
The BajaRon links now come with a dowel that make install very easy. You pre-assemble the spacers on the dowel, move the link into place and push the dowel out with the bolt.
The Super Glue tip was included in the instructions from the beginning because this is the method we used until we got the dowels.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|