Got her done - installed BajaRon bar plus foam grips & risers
What the factory didn't give me Bajaron (via lamonster) did, a nice riding machine. Install time was about 3 hours from jacking it up to setting her back down on the ground. Riding in the twisty's is no longer a problem. Shame on can am for making such a crappy sway bar. Installed foam grips and bar riser already all good stuff Maynard. Things are looking good here. Now to find some more trouble to get into...
If there was any "First" mod to do I would say this is the one.
It's well worth the price which isn't that much and gives you one hell of a noticeable difference on your ride.
Luv mine. Getting me some Quatracs next once it warms up.
2020 F3 SE6
Safety and Lighting: LED Headlight upgrade, IPS LED Fog lights, Show Chrome LED Fender Signals, LED Signature Light, Tric LED Afterburnerz, MotoHorn 2.0
Suspension: Wilbers Front and Rear Shocks, BajaRon Sway Bar, Vredestein Quatrac Front and Rear Tires
Comfort: Blue Ridge Windshield, Corbin Dual Touring Saddle, Ultimate Floorboards, OEM Passenger Backrest with Rear Shelf, OEM Passenger Floorboards Modified with High Risers from Pierre
Tackform Center Mount Phone Holder w/ rapid charging USB-C.
Since I bought the asphalt gray I get an option the other colors can't get... Darth Vader costume. I wonder if they have them in stock at Lamonster garage?
Since I bought the asphalt gray I get an option the other colors can't get... Darth Vader costume. I wonder if they have them in stock at Lamonster garage?
Yes, We are lucky with the Marsala Red, (3) options: Spiderman, Santa Claus, & Ronald McDonald.
2020 RTL Chrome, Marsala Red "Non-Directional Tires, Centramatic Balancers"
Front- Kumho KH-16 175/55r15 @17psi, Rear-General Altimax RT-45 215/60r15 @20psi
BaJa Ron Ultra 3 pcs sway bar kit
7jurock 25" tinted windscreen w/flip
Frogman Dave's "Signal Button" If in Doubt, Don't Do It!
" Pros: Excellent Bug Killer, Cons: Pizz Poor Pothole Dodger"
I have the BajaRon sway bar parts for both my 2021 RT and my wife's 2020 Ryker. I have to wait until spring because it's way too cold in my garage (plus no room) to install them now. Can't wait though.
As EdMat says above, 24” is required, Greg. Some have been innovative and have positioned the Spyder above a manhole of some kind when it comes time to drop the bar and insert the new one. Or they have driven the Spyder up tall ramps attached to the back of their pickup, etc etc……. It is so frustrating getting it all undone and finding you have only raised the Spyder 22”. Don’t ask me how I know
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
As EdMat says above, 24” is required, Greg. Some have been innovative and have positioned the Spyder above a manhole of some kind when it comes time to drop the bar and insert the new one. Or they have driven the Spyder up tall ramps attached to the back of their pickup, etc etc……. It is so frustrating getting it all undone and finding you have only raised the Spyder 22”. Don’t ask me how I know
Pete
Pic of when I installed my Swaybar, I removed the tailgate so the ramps would have a firm grip on the linex in the bed.
It was raining that day thus the position in the garage rather than outside.
Last edited by CloverHillCrawler; 02-03-2022 at 04:37 AM.
2020 F3 SE6
Safety and Lighting: LED Headlight upgrade, IPS LED Fog lights, Show Chrome LED Fender Signals, LED Signature Light, Tric LED Afterburnerz, MotoHorn 2.0
Suspension: Wilbers Front and Rear Shocks, BajaRon Sway Bar, Vredestein Quatrac Front and Rear Tires
Comfort: Blue Ridge Windshield, Corbin Dual Touring Saddle, Ultimate Floorboards, OEM Passenger Backrest with Rear Shelf, OEM Passenger Floorboards Modified with High Risers from Pierre
Tackform Center Mount Phone Holder w/ rapid charging USB-C.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
I've read where you need at least a 24" rise on the Spyder in order to slide the old bar out. Any confirmation on that?
Only needs to be in the air for a couple minutes.
2018 RT Ltd - Asphalt Metallic - East Valley of Phoenix
2018 RT Ltd Chrome - Champagne Metallic - Lake Stevens, Wa
(Champagne/Hooker) Magic Mirrors, 360 LED head lights, BajaRon sway bar, H&R springs and shock adjusters, dash cam, foam grips, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors, sequential turn signals on front fenders, Vredestein and PPA Orb wheels on front and General out back, and driver backrest.
Things that move between machines: Ikea sheep skins, Zumo XT GPS, and extra tools. Hooker is going to be my summer trike up North; and Hookie my winter trike down South.
(Asphalt/Hookie) Elka shocks on front - BajaRon sway bar, OEM driver's backrest, LED headlights, dual USB with voltmeter, dash cam, foam grips - Magic Mirrors - front tires Vredestein Quatrac SL on PPA ORB Chrome wheels.
I’ve used a Pit Bull lift since my Goldwing days. It has the stability and clearance to add the sway bars. I did that with my 2016 RTL and will use it on my F3L to install.
Whwen I replaced my swaybar, I used a forklift, the "spoons", under the a-arms, with a wooden block between them, worked like a charm, and is one of the best improvements to install...
the funniest thing about this particular signature is that by the time you realise it doesn't say anything it's to late to stop reading it........
Spyder F3s 2019 All Black ( Named it: Brutus)
Carbon Items added, just for looks
Upgraded Shocks Trac-Tive, Rear hi/lo and rebound adjustable, with Hydraulic Pre-Load adjuster
fronts hi/lo and rebound adjustable, custom made by the Trac-Tive Guru's
Swaybar (Ron's)
Tyres Front Michelin Cross Climate+ 175/60-15
Rear, for 2022 still a Kenda, next Yokohama Advan Fleva 205/55R15
Exhaust Bone stock, with a RLS Cat- Delete
Custom ECU-Mapping, rewritten/adapted to my Ridingstyle
Pedalbox, Awesome Upgrade...
Got her done - installed BajaRon bar plus foam grips & risers
Reply With Quote
Originally Posted by Rider Steve
If in Doubt, Don't Do It! 
......YES, 24"+ makes it an easy job. .... : )
