Results 1 to 12 of 12
  1. #1
    Active Member
    Join Date
    Aug 2018
    Location
    Columbus
    Posts
    325
    Spyder Garage
    1

    Default Questions about ryker fuel overflow locator

    Hey all, I keep seeing youtube videos about doing a ryker fuel overflow locator mod. It doesn’t seem like a hard mod and its pretty cheap. But my question is why? Has anyone who isn’t selling these kits actually done the mod and why did you do it. I have owned my 19 ryker rally for 2 years and have never had any issues or a desire to relocated the fuel overflow valve. Have others had this issue?

  2. #2
    Very Active Member SportsterDoc's Avatar
    Join Date
    May 2020
    Location
    New Mexico
    Posts
    788
    Spyder Garage
    1

    Default

    The fuel neck overflow on my 2020 was sufficiently long. Had it not been, additional hose connected with a barbed connector would have been more than adequate. The only times I had overflow was due to a high flow pump at the filling station.
    Last edited by SportsterDoc; 01-22-2022 at 09:40 PM.
    23 Moto Guzzi V7-850 SE 23 Yamaha XT250 18 Yamaha Bolt R-Spec 22 Triumph Street Twin 20 CanAM Ryker 900 14 Honda CB1100 18 Yamaha XT250 16 Moto Guzzi V7 II 17 Yamaha TW200 12 Triumph Bonneville 02 Sportster 1200 Sport 03 Sportster 883 76 Honda CB750F 75 Honda CB360 70 Yamaha CT1 72 Yamaha CT2 72 Yamaha AT2/CT2 70 Honda SL350 70 Honda CL350 67 Honda CL160 67 Honda CB160 62 Honda CA110
    2020 900 , NGK 4218 iridium CR8EIX Matte black

  3. #3
    Active Member RickD's Avatar
    Join Date
    Apr 2021
    Location
    Due South of Houston TX
    Posts
    139
    Spyder Garage
    0

    Default

    The only reasons I did it was because it looked like a good "ounce of prevention" mod and I already had all the necessary parts (I used vinyl tubing and nylon barb from my winemaking equipment).

  4. #4
    Very Active Member gkamer's Avatar
    Join Date
    Jun 2015
    Location
    Ritzville, Wa
    Posts
    2,163
    Spyder Garage
    0

    Default

    Quote Originally Posted by delkhouri View Post
    Hey all, I keep seeing youtube videos about doing a ryker fuel overflow locator mod. It doesn’t seem like a hard mod and its pretty cheap. But my question is why? Has anyone who isn’t selling these kits actually done the mod and why did you do it. I have owned my 19 ryker rally for 2 years and have never had any issues or a desire to relocated the fuel overflow valve. Have others had this issue?
    The way the current over flow hose is located, it has the potential to splash gas on some of the plastic around the right tire, and as you know, gas and plastic do not play nicely together. This mod extends the hose farther under the Ryker and directly onto the ground. I'm not so sure I like the thought of gasoline fumes building up under the bike and mixing with the heat of the engine/exhaust.
    Greg Kamer
    "It's better to be not riding and wishing you were than be riding and wishing you weren't."

    USAF, 20 years, retired
    Sheriff's Office, 23 years, retired



    2018 Can Am Spyder RT-Limited

  5. #5
    Active Member ziggy's Avatar
    Join Date
    Apr 2021
    Location
    North Carolina
    Posts
    256
    Spyder Garage
    0

    Default

    Over 50 years of riding, I've NEVER overfilled a tank but I'm getting pretty old and it may happen one day.

  6. #6
    Very Active Member Sarge707's Avatar
    Join Date
    May 2009
    Location
    Connecticut
    Posts
    3,659
    Spyder Garage
    0

    Default

    Quote Originally Posted by ziggy View Post
    Over 50 years of riding, I've NEVER overfilled a tank but I'm getting pretty old and it may happen one day.
    I agree! But at least it doesn't raise the RPM but not the speed.

    2015 F3 sm6, Custom Dynamics fender lights.

    Sea Doo GTI-SE 90 Jet Ski!!

  7. #7
    Active Member KnurledNut's Avatar
    Join Date
    Jul 2021
    Location
    Favoretta, FL
    Posts
    144
    Spyder Garage
    1

    Default

    Like others, I've never overfilled a motorcycle gas tank. That being said, I think adding some fuel line to lower the current overflow hose is a great idea. But not for $30 like others are selling them for. It's a $5 fix and a bit of time wrenching on the Ryker.
    2021 , generic

  8. #8
    Active Member tbohman56's Avatar
    Join Date
    May 2020
    Location
    Greenwood, SC
    Posts
    76
    Spyder Garage
    0

    Default

    I was used to topping off the tank on motorcycles, but I found with my Ryker when the gas nozzle shuts off, don’t try to top off. Every time I did that it would overflow.

    Currently Own: 2019 Ryker Rally
    Previously Owned: 2019 F3 Spyder

  9. #9
    Active Member
    Join Date
    Aug 2021
    Location
    Netherlands
    Posts
    97
    Spyder Garage
    0

    Default

    I got one for my Ryker rally to come (anxiuously awaiting delivery) and figured rather safe than sorry. Since it is such a cheap mod.

  10. #10
    Very Active Member Tslepebull's Avatar
    Join Date
    Dec 2018
    Location
    East Texas
    Posts
    607
    Spyder Garage
    1

    Default

    My 2019 Ra;;y has overflowed when i tried to top off the tank. However, the placement of the overflow tube from the factory doesnt appear to dump fuel on any of the structure
    2019 Ryler Rally , Shock Yellow

  11. #11
    Very Active Member SportsterDoc's Avatar
    Join Date
    May 2020
    Location
    New Mexico
    Posts
    788
    Spyder Garage
    1

    Default

    Quote Originally Posted by Inge View Post
    I got one for my Ryker rally to come (anxiuously awaiting delivery) and figured rather safe than sorry. Since it is such a cheap mod.
    Apparently the factory is not consistent in the overflow tube length. Additional length may not be necessary.
    23 Moto Guzzi V7-850 SE 23 Yamaha XT250 18 Yamaha Bolt R-Spec 22 Triumph Street Twin 20 CanAM Ryker 900 14 Honda CB1100 18 Yamaha XT250 16 Moto Guzzi V7 II 17 Yamaha TW200 12 Triumph Bonneville 02 Sportster 1200 Sport 03 Sportster 883 76 Honda CB750F 75 Honda CB360 70 Yamaha CT1 72 Yamaha CT2 72 Yamaha AT2/CT2 70 Honda SL350 70 Honda CL350 67 Honda CL160 67 Honda CB160 62 Honda CA110
    2020 900 , NGK 4218 iridium CR8EIX Matte black

  12. #12
    Active Member
    Join Date
    Aug 2018
    Location
    Columbus
    Posts
    325
    Spyder Garage
    1

    Default

    Quote Originally Posted by SportsterDoc View Post
    Apparently the factory is not consistent in the overflow tube length. Additional length may not be necessary.
    This is helpful for understanding. My stock overflow tube is long enough that it does not dump gas out on the plastic bits.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •